discussion Mk IV Top Tower Supply Tank & Sledge

[Guest]

Hello everyone
I'm another refugee from Military Modelling but also a returning member I was converting a Emhar Mk IV into a supply tank with a supply sledge.
View attachment 297686
View attachment 297687
This is just some of the wok I did.
Added springs to the vision port flaps, added 2 bolts above vision slits which would have reflector boxes on the the inside,Removed rivet under the Lewis gun.ballmounting, removed and added the right nuts & bolts ot the angle iron running along the lower edge.
View attachment 297688
Made escape hatch for the drivers cab roof. added missing rivets to the side of the cab, replaced pistol port pivots with nut & studs and added stops.
Remade the rear lookout hatch . Added missing pistol port.
View attachment 297689
The two sponsons (original one on the left) and converted it to the one on the right .Removed all suface details and boxed in the main gun, M/G apacher.
Lightly filled with Mr Surface 1000 and sanded, added pistol ports, viewing slots which are block, added new rivets to front & sides.
View attachment 297690

Made up fuel tank and missing return flange and rivets.
View attachment 297691
Used gluing jig to hold hull all nice and square .
View attachment 297692
Made up stowage protector box .Fitted Takom tracks instead of vinyl one supplied in the kit.
View attachment 297693
Made retaining pin for front tow eye also thined down lower half of tow eye. Made & added missing drivers floor pistol port, flated rivet heads on leading edge & side insteard of domed ones.Made & added envelope radiator filler and armour plate, also fitted rea convoy light wire.
View attachment 297694
Made new M/G using brass 2.5, 2.0 mm tubing.
View attachment 297695

 

[Guest]

On to the towing block or top tower. I used Balsa wood , white card and coper wire fof the large Bow shackle.and various plastic nuts and bolts.
View attachment 297696
View attachment 297697
View attachment 297698
View attachment 297699
View attachment 297700
Primed the body and the tranks, all painted by hand using my Artex roller :smiling4:
View attachment 297701
Base coat on and all paint as usual with the garden broom :thinking:
View attachment 297702
Thank you for looking.
Pete :sleeping:

 

[Guest]

HI
On to the supply sledge which is all scrtchbuild and was built yesterday so noe up to date. :smiling:

Parts used.
View attachment 297703
View attachment 297704
View attachment 297705
End supports and end rails .
View attachment 297706
View attachment 297707
Added side rails and centre supports.
View attachment 297708
Made bracing spas, made rivets & fiitted inside & out, made front and rear tow eyes from copper wire ( rear tow eyes are for second sledge)
View attachment 297709
View attachment 297710
View attachment 297711
View attachment 297712
Still got the towing mule to make which goes between the tank & sledge all connected with chains.

Thank you for looking.
Pete :thumb2:

 

[Jim R]

Hi Pete
Great to see you and glad to be able to continue to enjoy this build. Impressive scratching and attention to detail.
Jim

 

[Guest]

Pete,
Really happy to see this build, I do enjoy your WW1 builds, loads of inspiration.
Cheers, MikeC.

 

[Guest]

Hi Pete
Great to see you and glad to be able to continue to enjoy this build. Impressive scratching and attention to detail.
Jim

Hi Jim glad to see you and thank you, looks like there a few us on here which is great I had just got comfortable in the old site, shame it end the way it did :worried:, look forward to see more of your work :thumb2:
Pete.

 

[Guest]

Pete,
Really happy to see this build, I do enjoy your WW1 builds, loads of inspiration.
Cheers, MikeC.

Hi Mike glad to see you made it too I will be keeping a eye on your work for sure :thumb2:, I did manage to finish the airship tug & the Mk V before I moved back here the pics are on the Mil Mod site if you want to see them before it goes :worried:.
Pete

 

[Guest]

Hi small update.
Got the primer on, all my models are hand painted.

I'v made the pics smaller :flushed: sorry did not realise they were that big.
Pete.

 

[Guest]

Hi got the base coat on and some of the stowage primed, made a few extra ditching beam for the sledge.


Stowage for the top of the tank.



Thank you for looking.
Pete

 

[grumpa]

Great scratch work so far Pete, am watching this one with great interest. :thinking:

Jim:smiling4:

 

[Guest]

Great scratch work so far Pete, am watching this one with great interest. :thinking:

Jim:smiling4:

Thank you very much I'm glad you like it :smiling3:
Pete

 

[Guest]

Some of you people scare me:flushed:

 

[Ian M]

Thats pretty cool. Great scratch building.
Dont have to worry about the larger photos, makes it much easier to see whats going on.

 

[papa 695]

Welcome ( back ) Peter and some great work going on.

 

[Guest]

Welcome ( back ) Peter and some great work going on.

Hi Ian thank you, you have a very good memory it's almost a year ago that I last posted on here and I have been made most welcome :thumb2:
Pete.

 

[Guest]

Thats pretty cool. Great scratch building.
Dont have to worry about the larger photos, makes it much easier to see whats going on.

Cheers Ian, I try my best, thamks for the info on the pic's didn't want start off on the wrong foot :relieved: I may make the pic's a tadd bigger then.
Pete.

 

[Guest]

Some of you people scare me:flushed:

Hi Tony I have no idea what I've done wrong ??? I can only say sorry.
Pete.

 

[Guest]

Hi Tony I have no idea what I've done wrong ??? I can only say sorry.
Pete.

Pete.
Tony was hinting that you are very good ! :thumb2:

The build is stunning , the sledge is quite a work of engineering. Good to see this on here.
John

 

[Guest]

Some of you people scare me:flushed:

Hi Tony I have no idea what I've done wrong ??? I can only say sorry.
Pete.

Hi Tony I owe you an apology, I misinterpret your kind comment, Thank you :flushed: :flushed: :flushed:.
Pete.

 

[Guest]

Pete.
Tony was hinting that you are very good ! :thumb2:

The build is stunning , the sledge is quite a work of engineering. Good to see this on here.
John

Hi John thank you very much, I'll take average.
Pete.