Loving it Jigs!!! Fantastic job so far and it is a bit funny the wiper was too long. Good fix Sir. Might I ask why you have a shim under the right front tire??? Great mucking up too!!!...
Prost
Allen
Prost
Allen
Jim's 1/35 Trumpeter Sd.Kfz 7/1
- Thread starter Jim R
- Start date
Jim
That is looking spectacular already, even if the wheel decided to elevate itself to cause you problems!
Keep up the great work.
Andrew
That is looking spectacular already, even if the wheel decided to elevate itself to cause you problems!
Keep up the great work.
Andrew
Nice one Jim this is looking superb
Looking good Jim. The wiper issue would have been because Trumpeter never bothered to design a seperate smaller wiper for the split screen version screens such as the one in your kit. Lazy bar stewards!
G
My word Jim, that is turning into a model to be proud of.Very impressed with those tracks .:smiling3:
I always use a metal primer on the PE , gives the paint a better grip . Know some people don't bother ,saying it's not required but I found with the unprimed pe the paint comes off easily.
I always use a metal primer on the PE , gives the paint a better grip . Know some people don't bother ,saying it's not required but I found with the unprimed pe the paint comes off easily.
Well I'm sorry for even my slow modelling progress slowing even more but my daughter kindly shared Covid with me and the wife!!! :sad:
Last Friday we went to visit. We had a lovely, family get together and went to the Chester Zoo Christmas Spectacular. We had booked into a local hotel for Friday night and intended spending Saturday as a family. Early Saturday morning my daughter messaged to say she had felt poorly in the night and tested positive, as had the granddaughter. We went straight home. Started to feel rough Sunday evening and my wife and I tested positive on Monday. Felt weak and shivery with a running nose and a cough until Thursday when we both started to improve. We both tested negative this morning and although not totally recovered we are both much improved. So yesterday afternoon was the first bench time for over a week.
So very little done. Sorry Dave I've missed the deadline.
Started on the gun. Kit barrels replaced with metal ones.
Jim
Last Friday we went to visit. We had a lovely, family get together and went to the Chester Zoo Christmas Spectacular. We had booked into a local hotel for Friday night and intended spending Saturday as a family. Early Saturday morning my daughter messaged to say she had felt poorly in the night and tested positive, as had the granddaughter. We went straight home. Started to feel rough Sunday evening and my wife and I tested positive on Monday. Felt weak and shivery with a running nose and a cough until Thursday when we both started to improve. We both tested negative this morning and although not totally recovered we are both much improved. So yesterday afternoon was the first bench time for over a week.
So very little done. Sorry Dave I've missed the deadline.
Started on the gun. Kit barrels replaced with metal ones.
Jim
Sorry to hear that Jim... it`s a real bugger isn`t it
.... hope you`re back to rude health soon:thumb2:!!
Just caught up with the build and gotta say it looks SUPERB ,the weathering is just right IMHO..... and those Barrels look excellent
Great stuff!!
Andy
.... hope you`re back to rude health soon:thumb2:!!Just caught up with the build and gotta say it looks SUPERB ,the weathering is just right IMHO..... and those Barrels look excellent
Great stuff!!
Andy
G
Jim,
Sorry to hear you caught the covid, that is what I think I have had for the past week or so, totally knocks the beans out of the bag, but you will soon be back on your feet and on with the build. I still have that annoying tickle cough at the back of the throat, but am on the mend.
As for the important item - the build, looking great and love the replacement barrels.
Mike.
Sorry to hear you caught the covid, that is what I think I have had for the past week or so, totally knocks the beans out of the bag, but you will soon be back on your feet and on with the build. I still have that annoying tickle cough at the back of the throat, but am on the mend.
As for the important item - the build, looking great and love the replacement barrels.
Mike.
Loving those barrels. Great improvement on the kit parts……
Hope you get back to full health soon. Vaccines certainly speed up the virus cycle don’t they. First time I had it, pre vaccine, I was quite ill for about three weeks…..post vaccine, it lasted four days and was much milder.
Hope you get back to full health soon. Vaccines certainly speed up the virus cycle don’t they. First time I had it, pre vaccine, I was quite ill for about three weeks…..post vaccine, it lasted four days and was much milder.
Great replacements Jim, get well soon
Well apart from a bit of a lingering cough we are over the Covid.
Progress has been slow. Trumpeter decided that the more parts they put into the kit the better the detail!! :rolling:
Still a way to go with the guns but I'm at the stage where I think a coat of paint will be needed as there are already a lot of nooks and crannies to get paint into. There are PE shields which will make things even more difficult. Looking at the shields their construction will be a challenge :thinking:
Magazine holders made.
JIm
Progress has been slow. Trumpeter decided that the more parts they put into the kit the better the detail!! :rolling:
Still a way to go with the guns but I'm at the stage where I think a coat of paint will be needed as there are already a lot of nooks and crannies to get paint into. There are PE shields which will make things even more difficult. Looking at the shields their construction will be a challenge :thinking:
Magazine holders made.
JIm
Great news Jim!!! Good to hear you and yours are feeling much better. FlaK is looking really nice too. It's a shame Trumpeter doesn't give you the plastic shields as an option. It would be nice to have the choice of which ones you could use. Prob make your life easier too...
Prost
Allen
Prost
Allen
Looking good Jim and glad you are all OK
G
Here’s a thought: Jim could do in reverse what modellers have been doing since photoetched accessory sets became available. That is: buy a Tamiya Flakvierling and use its shields in place of the etched ones provided in the Trumpeter kit
Looking good Jim. The barrels really add to that ensemble nicely. Really sharp!
Regarding the gun shield….were all the Flakvierling guns fitted with them? Just thinking aloud because that would solve two problems…..no etch to worry about, and no hidden detail…..
Regarding the gun shield….were all the Flakvierling guns fitted with them? Just thinking aloud because that would solve two problems…..no etch to worry about, and no hidden detail…..
Hey Jim,
I have this kit that I'll never build,(done 2 Versions of these in the past),if you would like it for the shield bits just say the word and I'll post it off to you :smiling3:
I have this kit that I'll never build,(done 2 Versions of these in the past),if you would like it for the shield bits just say the word and I'll post it off to you :smiling3:
Looking good and dirty Jim. Glad too that you're both recovering.
Cheers,
Richard aka Wabble
Cheers,
Richard aka Wabble
Thanks guys for your good wishes. Also your thoughts on the model.
Jakko - I do agree that when a manufacturer includes PE it should be an alternative to plastic parts rather than the only option.
Tim - that's a good thought. Maybe shields were sometimes omitted.
Andy - thanks for your kind offer but I think I'll persevere with the PE. This will eventually go into a dio and the gun will be covered with a tarp so if I do c**k-up the shields it won't matter.
There are two inner shield which fit over the barrels. They look fiddly but doable.
Fitting them over the barrels looks to be the problem. It appears that the attachment points are tiny and are themselves small, folded PE parts.
I'm sure there's a way around it and I've a comprehensive range of swear words which may be useful and no hair to pull out anyway :smiling:
Jakko - I do agree that when a manufacturer includes PE it should be an alternative to plastic parts rather than the only option.
Tim - that's a good thought. Maybe shields were sometimes omitted.
Andy - thanks for your kind offer but I think I'll persevere with the PE. This will eventually go into a dio and the gun will be covered with a tarp so if I do c**k-up the shields it won't matter.
There are two inner shield which fit over the barrels. They look fiddly but doable.
Fitting them over the barrels looks to be the problem. It appears that the attachment points are tiny and are themselves small, folded PE parts.
I'm sure there's a way around it and I've a comprehensive range of swear words which may be useful and no hair to pull out anyway :smiling:
Many crews felt the added visibility was worth leaving the shields off, plus, it was easier to conceal.
Love this project Jim, very nice model and paintwork :thumb2:
Have fun, Steven
Have fun, Steven
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.