discussion 1/35 Hasegawa Hitachi Zaxis 135 us excavator.

[outrunner]

I now tend to shy away from things with tracks, but I could not resist this model as in my earlier days I spent a few years driving construction equipment. I will be building the model fitted with a bucket as that crusher looks a bit naff.
View attachment 417693
Some sprue shots.
View attachment 417694
View attachment 417695
View attachment 417696
View attachment 417697
I really should have taken some close up pictures as the detail and quality of the parts is amazingly good.
Here are a few shots of sub assemblies, the boom, dipper, bucket, rams, undercarriage and part of the dozer blade are glued up but the superstucture is just slotted together and it all fits perfectly.
View attachment 417698
All bagged up so I don't lose the place with the build.
View attachment 417699
The rubber tracks are the only inferior parts but they will probably be covered in muck anyway.

Andy.

 

[Guest]

Uncanny! I've been looking at this kit after seeing one built with a large bucket instead of the nibbler.

Will follow along with interest.

 

[outrunner]

I looked on the net for ages for one with a bucket to no avail then I discovered that the crusher kit also contains a bucket, job done.

Andy.

 

[Guest]

Just the job Andy, looks good. Those rubber tracks will be ok as you say plenty of debris to cover them.
Sitting at the front.

 

[outrunner]

Well that's it all primed up so we shall get some paint on and see if I can put it together without any trace of glue.
View attachment 417999
It's all very complex and needs to be painted in sub assemblies before constructon as you could not paint it properly after building it.

Andy.

 

[outrunner]

Some of the larger bits painted a nice orangey colour, not exactly factory but as near as I could get. Perhaps a coat of gloss laquer will improve it, or not, we shall see.
View attachment 418196
The paint is a Citadel layer colour, really thick and a bit of a bitch to get the thinning right to airbrush although to be fair it is designed for brush painting.

Andy.

 

[Lee Drennen]

Nice Andy I think I’ll pull up a chair

 

[outrunner]

I got a bit more done this afternoon, mostly the cab which has a lot of small decals which will never be seen when complete.
View attachment 418264
View attachment 418265
And some detail on the engine which also will never be seen........................
View attachment 418266
.........as it's covered by this.
View attachment 418267
I could always prop the cover open I suppose but it would likely get broken off.

Andy.

 

[Ian M]

Looks like a good little kit. There seams to be a good few kits of contractors machines about.

 

[outrunner]

Looks like a good little kit. There seams to be a good few kits of contractors machines about.

It is a very good kit, great quality moulding and detail. In my opinion there is very little out there in the way of construction equipment kits in any scale. Hasegawa make a front end loader and vibrating roller and there are a few decent tractor kits but I have looked long and hard for anything resembling modern earthmoving/construction machines to no avail.

Andy.

 

[outrunner]

I had a great time today fitting a load of rubber and plastic hoses to the boom and dipper mechanism.
View attachment 418555
View attachment 418556
View attachment 418557
I can not begin to describe just how much fun that was.
I also had a go with my first attempt at brush painting some chipping, not a lot, as all the pictures of the real thing I looked at had very little damage, not surprising really as it is the US version which has nothing to do with the USA but it means it is the ultra short version designed for working in confined spaces.
View attachment 418558
View attachment 418559
It looks better in real life than in the pictures but I think I need more practise.

Andy.

 

[Guest]

Do I detect a hint of sarcasm about the hoses? :smiling5:

Scratches look to have worked well Andy and I really like the colour. Troll Slayer? I've been looking at that for a future project as it's also available in their airbrush range.

 

[outrunner]

Do I detect a hint of sarcasm about the hoses? :smiling5:

Perhaps just a bit, really time consuming job but it's done now.

Andy.

 

[outrunner]

I really must get on with this as people are starting to laugh at me now.
View attachment 418909

Andy.

 

[yak face]

Excellent progress andy , the orange looks great and the restrained chipping is perfect . Like yourself, i cant understand why there arent more kits like this , its a very interesting genre and i reckon some decent backhoe loaders ( JCBs ) and bulldozers would do well. There are a few military dozers but as far as i am aware only the old AMT 1/25 in the civil field . I do a lot of deliveries for work to building sites and are always unloaded by the ubiquitous JCB telehandler , a fantastic machine , and wondered if there were any kits ( unlikely ) or toys to represent this . I found a 1/32 toy thats accurate if a little simplified and intend to strip down , repaint and add a few details . Keep up the excellent work , looking forward to the next instalment , cheers tony

 

[stillp]

Airfix did a 1/76 JCB on a low loader in the 60s. I think it was my first experience of Humbrol yellow. :disappointed2:
Pete

 

[stillp]

Oh and yes, that's looking really good Andy.
Pete

 

[outrunner]

Thanks for the kind comments chaps.

Andy.

 

[outrunner]

My first go at doing a figure, stop laughing at the back. I know it's not very good but you have to start somewhere and with a bit of dust on the cab windows it will hardly be seen.
View attachment 419080
View attachment 419081
Looking at the photos it would seem I have overdone the dirt on the floor but I can clean that up later.

Andy.

 

[Jim R]

Hi Andy
Late to the party - sorry. What a nice kit, well done and unusual. Your progress to date is great. Nice paint job and realistic chipping. Figure is fine.
Jim