An American Spy Ship?
- Thread starter rtfoe
- Start date
Richard
I've only been in the hobby properly for a few years but this has to be one of THE standout builds I've come across in that time.
It would be a brilliant effort even if it been straight OOB, let alone with the amount of scratchery at 1/700.
The water coming out of the pumps is a work of art in itself.
I don't know anything about these ships, so if there is anything wrong about it (which I strongly doubt) I wouldn't know. But that's not the point.
What is the point, is that this is a truly outstanding model, which would grace any table at the best model competitions there are.
This will live long in my memory. Congratulations on a job VERY well done.
ATB.
Andrew
I've only been in the hobby properly for a few years but this has to be one of THE standout builds I've come across in that time.
It would be a brilliant effort even if it been straight OOB, let alone with the amount of scratchery at 1/700.
The water coming out of the pumps is a work of art in itself.
I don't know anything about these ships, so if there is anything wrong about it (which I strongly doubt) I wouldn't know. But that's not the point.
What is the point, is that this is a truly outstanding model, which would grace any table at the best model competitions there are.
This will live long in my memory. Congratulations on a job VERY well done.
ATB.
Andrew
Bilge pumps! Who does that? One to be proud of. Just outstanding. PaulE
Richard this is a work of art you have truelly outdone yourself on this model VERY WELL DONE :thumb2::thumb2::thumb2::thumb2::thumb2::thumb2::thumb2: An i like the guys an gals have enjoyed whatching you build this AGAIN VERY WELL DONE an YOU SHOULD BE PROUD OF YOUR SELF :thumb2::thumb2::thumb2::thumb2::thumb2:
chriis
chriis
Guys...I'm blushing like a beetroot and thank you for the nice compliments.
Hop over to the finished images site here...I have loads of images that are much more clearer. I hope you enjoy them as much as I liked photographing them...spotted lots of things I couldn't imagined I was mad enough to do but happy it was accomplished. Headache over. :smiling2:
Cheers,
Richard
Hop over to the finished images site here...I have loads of images that are much more clearer. I hope you enjoy them as much as I liked photographing them...spotted lots of things I couldn't imagined I was mad enough to do but happy it was accomplished. Headache over. :smiling2:
Cheers,
Richard
Here's an image together with the actual picture of the Oxford to compare.
Maybe I should try one more shot at the same angle. I should have added the pick up truck just to create conversation.
Cheers,
Richard
Maybe I should try one more shot at the same angle. I should have added the pick up truck just to create conversation.
Cheers,
Richard
YEA Richard add the pickup truck i think as it was on the ship
chris
John, I forgot to take pictures of the delivery package.
The Oxford is safe having at least 2 inches of clear space around it in once the perspex casing covers it. Then using industrial cling wrap, did a few layers tightly for all 4 corners. It fitted into a shoe box but the lid stood proud of the casing height. I cling wrapped that too. The gap between the lid and box gave the opportunity to see the Oxford and check that it's fine.
I will leave you with a shot of my favorite part of the build... The rear mast.
Cheers and Happy New Year,
Richard
The Oxford is safe having at least 2 inches of clear space around it in once the perspex casing covers it. Then using industrial cling wrap, did a few layers tightly for all 4 corners. It fitted into a shoe box but the lid stood proud of the casing height. I cling wrapped that too. The gap between the lid and box gave the opportunity to see the Oxford and check that it's fine.
I will leave you with a shot of my favorite part of the build... The rear mast.
Cheers and Happy New Year,
Richard
HI Richard for me its so sad for me to see this build end as i loved lookin on here each day to see what you was up to on this build but now its finished WELL i hope you will have another ship in the pipeline soon as the work you have done ont this USS OXFORD was amazeing in such a small scale love to see you do a 1/350 ship because if you can sqeze all that in on such a small ship just think what you can fit on a bigger 1/350 scale as to me Richard you are such an amazeing modeler an happy new year to you sir from us
chris an jen
chris an jen
Thank you Christopher, I hope to get back to normal building or basically OOB ones. I do have to get my Hellcat finished for Simon's tribute and be off ships for awhile.
Oops...it's already the new year, I hope you and Jen will have a great one this year.
Cheers,
Richard
Oops...it's already the new year, I hope you and Jen will have a great one this year.
Cheers,
Richard
Hi, I don't know if I had posted this link before but it's a video from one of the crew that served with the Oxford.
Seems like a better researched video and shows where the smokestack of the incinerator that I was looking for.
Cheers,
Richard
Seems like a better researched video and shows where the smokestack of the incinerator that I was looking for.
Cheers,
Richard
HI Richard well ive just watched this vid right through an enjoyed it thanks for showing it :thumb2:
chris
Glad you liked it. Whatever he mentions is exactly what I posted on the first page. The difference is he has some really nice shots of the Oxford, the "Gig" and the incinerator smokestack. My gestimation was about right for the placement of the latter.
Cheers,
Richard
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.