System Light Dark

Theme editor

Page Setup Appearance

  • Page Width

    Toggle Page Width

    Allows you to change page width values

    Color Pickers

    Toggle color picker

    Allows you to change the color of some predefined items

    Typography

    Select the font you want to use

  • Styles

    Select the style you want to use

    Style variation

    Select the style variation you want to use
    System Light Dark
Scale Model Shop

Building the IMARA TUG

  • Thread starter Thread starter Guest
  • Start date Start date
Thread owner
Thanks Ian, I think you hit the nail on the head there.
 
Thread owner
Thread owner
Day 22

While giving the hull a few days to dry after todays final coat of red I decided to take a look at the rear cabin. First off was to try and put right the mess they made of the moulding. At the rear side the whole end had caved in and dried, this left a concave look to it and it needed to be put right so I wedged a little bit of timber in there. This then cracked the surface finish so I had to sand out the step the crack had made. The I found that the two hatches on the rear were slightly too big because the mould was obviously too small, an other blunder they have never corrected.

View attachment 61656View attachment 61659View attachment 61667View attachment 61660View attachment 61657View attachment 61658

I remember reading a comment about CA and white metal crystallising and causing problems. Though I have never had a problem with it myself I thought I would try it the Poxy way and purchased some of this stuff. Seems to do the job just as well but a little slower than the 2 min thick ZAP.

View attachment 61666

Cheers

Andy

View attachment 63149

View attachment 63150

View attachment 63151

View attachment 63152

View attachment 63153

View attachment 63159

View attachment 63160

View attachment 176175

View attachment 176176

View attachment 176177

View attachment 176178

View attachment 176179

View attachment 176185

View attachment 176186
 
Thread owner
 
Thread owner
Day 24

Painting the rear cabin.

View attachment 61898View attachment 61899View attachment 61900

Now for a little weathering

View attachment 61901View attachment 61902View attachment 61903View attachment 61904View attachment 61905View attachment 61906View attachment 61907View attachment 61908View attachment 61909View attachment 61910View attachment 61911

Cheers

Andy

View attachment 63376

View attachment 63377

View attachment 63378

View attachment 63379

View attachment 63380

View attachment 63381

View attachment 63382

View attachment 63383

View attachment 63384

View attachment 63385

View attachment 63386

View attachment 63387

View attachment 63388

View attachment 63389

View attachment 176402

View attachment 176403

View attachment 176404

View attachment 176405

View attachment 176406

View attachment 176407

View attachment 176408

View attachment 176409

View attachment 176410

View attachment 176411

View attachment 176412

View attachment 176413

View attachment 176414

View attachment 176415
 
Thread owner
 
Thread owner
You wouldn't think there were 50 parts in that cabin eh? .... but anyway ... it's painted and weathered brilliantly, the contrast between the slight gloss of the paint and the dull texture of the rust is very believable.... if the whole boats going to be done like that then it'll be awesome.

The red and black contrast of the hull looks smart too, nice and evenly painted with crisp lines ....

are you leaving the screws painted or are you going to give them a brass/cast overcoat.??
 
Thread owner
Thanks Colin - the screws were originally brass as you can recall. Im thinking of giving them a coat of old bronze or something along those lines.

Day 26

The hull needed a good wash to give it some age so I mixed some Burnt Humber oil paint with a little Black afterwards with some white spirits and gave it a wash, drawing it downwards with some paper towel.

View attachment 62060View attachment 62061View attachment 62062View attachment 62063View attachment 62064View attachment 62065View attachment 62066View attachment 62067View attachment 62068View attachment 62069

Cheers

Andy

View attachment 63531

View attachment 63532

View attachment 63533

View attachment 63534

View attachment 63535

View attachment 63536

View attachment 63537

View attachment 63538

View attachment 63539

View attachment 63540

View attachment 176557

View attachment 176558

View attachment 176559

View attachment 176560

View attachment 176561

View attachment 176562

View attachment 176563

View attachment 176564

View attachment 176565

View attachment 176566
 
As you are building this one as a runner as much as a shower, I would suggest that you take the props off, bung them in a tin of nitoromores and get the paint off them. The boat will run much better with bare props.

A nice brass prop also looks the part when its parked up on the shelf.

Ian M
 
Thread owner
Thanks Ian, It is my intention to do both with this one as I have seen some in a few shows that look great but could do with that little realism look. These boating guys are just sailors, They make a great attempt at adding that scale look but unlike you or I they don't quite have they eye or the knowhow to achieve a show stopping result. So if I can hit the bar with this one I'm hoping it will return some great first prizes.

Cheers

Andy
 
Thread owner
Day 28

I added some stain to the decking supplied with the kit and then distressed it to give that weathered look. As you can see the effect is fantastic, however, the problem is that you can see the grain across the part and it doesn't quite cut it for me and would spoil the finished effect.

View attachment 62200View attachment 62201

With this in mind I decided to purchase some 3mm x 1mm Walnut planking and started to plank on top of the ply sheet using it for reference. The finished result for this should turn out to be spot on.

View attachment 62202View attachment 62203

Cheers

Andy

View attachment 63662

View attachment 63663

View attachment 63664

View attachment 63665

View attachment 176688

View attachment 176689

View attachment 176690

View attachment 176691
 
Thread owner
The walnut looks rather good Andy, nice fix. Cheers Derek
 
Top job with the seperate planks andy , looks much better than the other bit , cheers tony
 
Thread owner
Thanks guys, its a bit labour consuming but the end result should be stunning.
 
You must log in or register to reply here.

Legal Notice

scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.

Currently on our website
Members online
Threads 36,172
Messages 695,429
Members 2,507
Latest member paul020559
Back
Top