discussion Can I polish AquaGloss?

[Guest]

I sprayed Alclad AquaGloss over Vallejo Model Air that had cured for a week and got a pebbly finish. I sprayed it with a .5 needle at 18psi. Two medium coats like it says on the bottle. Wet but not runny. I tried it a few days ago on a mule and got good results. This time not so much. Do subsequent coats on dried layers help? Is it possible to sand or polish this stuff smooth?

- CF

 

[Ian M]

Not sure about that as I have never had to. Maybe best to do a test piece first.

 

[Andy T]

I've sanded it before now ready for subsequent coats but never tried polishing it, if that helps any.

I've also found it can separate on certain surfaces leaving the pebbly finish you mention. A very light initial dust coat or two can give the later, wetter coats something to grip to.

 

[Tim Marlow]

Wouldn’t think polishing will take away the pebble finish Colin. It will just make the high spots shine and stand out more. You need to level out the surface before recoating. Andy is probably the authority here.

 

[Guest]

I've sanded it before now ready for subsequent coats but never tried polishing it, if that helps any.

I've also found it can separate on certain surfaces leaving the pebbly finish you mention. A very light initial dust coat or two can give the later, wetter coats something to grip to.

Thanks