Sorry to hear youre having a bit of bad luck mate but look on the positive side , the smoke alarm did its job and saved things from being a lot worse. The main thing is youre ok , cheers tony
Gern's 1/32 Trumpeter F-105G - A Sad End.
- Thread starter Gern
- Start date
Thanks guys. Cat flap done and new rear window fitted so back to normal.
A bit more progress. I was hoping to have both wings fitted but they need to be pulled tight against the fuselage to close the gap. Rather than trying to close the gaps by pulling both wings together, I'm doing them individually. That way, I have a solid bit to fix my tape to and hold the wing while it sets. Once set, it will give me a solid base for the tape on the other wing. The nose cone went on with no need for filling and the tailfin fitted with only a tiny gap which I filled with Vallejo putty. I've also knocked up a couple of FOD covers from some sheet balsa.
View attachment 400731
View attachment 400732
View attachment 400734
Terrible pics I'm afraid.
A bit more progress. I was hoping to have both wings fitted but they need to be pulled tight against the fuselage to close the gap. Rather than trying to close the gaps by pulling both wings together, I'm doing them individually. That way, I have a solid bit to fix my tape to and hold the wing while it sets. Once set, it will give me a solid base for the tape on the other wing. The nose cone went on with no need for filling and the tailfin fitted with only a tiny gap which I filled with Vallejo putty. I've also knocked up a couple of FOD covers from some sheet balsa.
View attachment 400731
View attachment 400732
View attachment 400734
Terrible pics I'm afraid.
Attachments
G/M Dave yea but at least now we can see some progress an you can only get better takin pics lol an i like your FOD covers
chris
Hi Dave
They say bad luck comes in threes so hopefully you're ok now for a while. There seems to be a lot of problems with tumble driers. Ours was replaced as it was on a recall list. We only use ours now when we are actually downstairs with it.
Jim
They say bad luck comes in threes so hopefully you're ok now for a while. There seems to be a lot of problems with tumble driers. Ours was replaced as it was on a recall list. We only use ours now when we are actually downstairs with it.
Jim
HI Dave whats happen on this build ?
chris
chris
I was hoping to beat you to it Chris! I have made some progress. My wingy thingy now has wings!
That's a 12" (300mm) rule.
The colour on these looks OK
There's a couple of sticky-out bits (technical term) to add, and a smear of filler in the wing joints, but I'm hoping to get on to masking and painting on Tuesday.
Big old lad isn’t it......build is going well though :thumb2:
Well Dave im glad you have got over your bad luck an you are building again as some of your terms make me laugh (eg like the sticky out bits ) gave me a good
Sorry my pc is playin up i'll reprint the post
Well Dave im glad you have got over your bad luck an you are building again as some of your terms make me laugh (eg like the sticky out bits ) gave me a good giggle an yes it is a biggee wingy thingy an it look like you are doin a good job but when is this cunning plan comin ?
chris
Well Dave im glad you have got over your bad luck an you are building again as some of your terms make me laugh (eg like the sticky out bits ) gave me a good giggle an yes it is a biggee wingy thingy an it look like you are doin a good job but when is this cunning plan comin ?
chris
Forgot to mention. The small masking tape strip has the part number for the tailplane so I didn't get them the wrong way round. I think they're both the same anyway, but better safe than sorry.
As for my cunning plan, you're going to have to wait and see. You should know that cunning plans sometimes take a while to come to fruition, although I'm not so sure now that it is actually a cunning plan. I've found a piece of MDF I can use as a base but it's 24"x18" (600mmx450mm) - and I have absolutely nowhere in the house to put it when it's finished!
As for my cunning plan, you're going to have to wait and see. You should know that cunning plans sometimes take a while to come to fruition, although I'm not so sure now that it is actually a cunning plan. I've found a piece of MDF I can use as a base but it's 24"x18" (600mmx450mm) - and I have absolutely nowhere in the house to put it when it's finished!
Great progress Dave and good to see you got the wings on her ok. Not sure about your fingernail polish though.....A little too bright I think.....
I'd say it's time to get yourself a new ruler. Maybe a yardstick would do the trick being it's such a big bird and all........
Prost
Allen
I'd say it's time to get yourself a new ruler. Maybe a yardstick would do the trick being it's such a big bird and all........
Prost
Allen
WELL Dave shirely something is happening on this by now or is there a strike on ?
chris
chris
WOW Dave you are actually doin somethin on this as i :thinking: thought he;s hangin it out to tease me again lol
chris
chris
WELL Dave its past 5 am an wot no pics lol
chris
chris
HI Dave wots happened to the pics ?an will we hear anything from april an may ?lol
chris
chris
Sorry Dave
chris
chris
Hi folks.
Been a long time since I last posted anything on this build. That's because I haven't been able to do any building recently, or much of anything else to be honest.
I posted some stuff a few months ago saying I was having problems with my shaky hands. It's a problem I've been having for a few years and it has come and gone quickly so I didn't do anything about it. About 3 weeks ago, I got the shakes again only this time they didn't go away and they were so bad I couldn't do any modelling. I couldn't even post recent pics of my progress as I couldn't operate the tiny buttons on my camera.
Anyway, I managed to get an appointment with my GP yesterday. He's ruled out Parkinson's which is a massive relief and thinks it's something called essential tremor. It may turn out to be controllable with simple medication but I need to get blood tests and maybe a neurological exam. I can't get a test until early next month but I've started my meds today.
Keeping my fingers crossed I'll be able to get back to the bench soon, but don't worry (or start cheering) you can't get rid of me that easy. I'll be dropping in daily to keep my eye on you so behave yourselves!
Been a long time since I last posted anything on this build. That's because I haven't been able to do any building recently, or much of anything else to be honest.
I posted some stuff a few months ago saying I was having problems with my shaky hands. It's a problem I've been having for a few years and it has come and gone quickly so I didn't do anything about it. About 3 weeks ago, I got the shakes again only this time they didn't go away and they were so bad I couldn't do any modelling. I couldn't even post recent pics of my progress as I couldn't operate the tiny buttons on my camera.
Anyway, I managed to get an appointment with my GP yesterday. He's ruled out Parkinson's which is a massive relief and thinks it's something called essential tremor. It may turn out to be controllable with simple medication but I need to get blood tests and maybe a neurological exam. I can't get a test until early next month but I've started my meds today.
Keeping my fingers crossed I'll be able to get back to the bench soon, but don't worry (or start cheering) you can't get rid of me that easy. I'll be dropping in daily to keep my eye on you so behave yourselves!
Good luck with the meds Dave. Hope this gets positively resolved soon.
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.