Do I know that feeling!
HO 80s/90s CSX, NS, & Conrail layout resurrection.
- Thread starter minitnkr
- Start date
Highlines are nickel & old or lightly used sidings are brass rail. All are 100#. PaulE
Progress pics. Control panel/old station section 'dry fit'.
AAAHHHRRRGGGG! Something has changed. Attachment holes are not aligning on the left. Cave remodel must have changed environment.
C&Cs welcomed. PaulE
AAAHHHRRRGGGG! Something has changed. Attachment holes are not aligning on the left. Cave remodel must have changed environment.
C&Cs welcomed. PaulE
Well that's going to keep you out of trouble for a day or two isn't it ?
No need to panic. Industry yard section was hung up on wiring terminal block. SWMBO's b'day Sat. so no benchtime to keep the peace.
Testing may begin Sun. PaulE
Testing may begin Sun. PaulE
An the same from jen an I wish your wife a very happy B-day an have a good time
PaulE an im lookin forward to when you fire up the railway hope it all geos ok
QUESTION are all the rail lines live or are they only live when you throw the points to that rail only ? as on my layout for that zero 1 all rails were live's an return's as the loco had a computer chip fitted an would only go when I programmed in the loco's no. in to the computer an then it would send a digital signal through the track to tell that loco to move an all the other trains wont go until I again fed in to the zero1 unit another loco no. an that one would move too it was a good idea an system if only Hornby had made the system more powerfull
jen an chris
Thank you. I use the old DCV block system where all rails are live unless the block they are in is turned off, so only one train at a time unless your trains are tuned alike in speed or load is tuned to match train speeds. This is pretty dodgy, but I have done it for short periods on the previous large dbl. dogbone layout. PaulE
G
Just gets better and bigger Paul, hope there is a grand opening for all to see !
Sat. was dinner & a movie. Sunday we binged Homeland's 5th season, so no testing. Well, testing Monday did not go well. Intermodal sections passed fine, actually test ran a few locos. Large industrial section has a dead short somewhere & brought the controller down. I'll have to pull up that module & bench troubleshoot it. Rather than take an axe to the whole thing, I started constructing some tanker kits that were in the WIP box. Merry Christmas to all. PaulE
Merry Christmas Paul I like the chassis stacker
Thanks, don't know where the prototype pics went, but that's what I modeled it after. PaulE
These took about 3hrs apiece to get to weather stage shown here w/metal couplers & wheelsets added & tuned. Found model kits of hotbox sensors & loose/dragging stuff sensors plus some nice relay boxes by Details West. Pics to follow.
PaulE
PaulE
Control section work progresses. Abandoned station/water tank now open market on weekends. Relay boxes, hot box sensors & alert light, dragging sensors & warning light, turnout motors & battery boxes installed. PaulE
Ind. module back up for troubleshooting.
Some track damage causing short due to aligning upper level w/o checking lower. Duh! Will continue checking.
Needed fencing to keep out civilians.
Christmas present. Lotsalitlparts.
Some track damage causing short due to aligning upper level w/o checking lower. Duh! Will continue checking.
Needed fencing to keep out civilians.
Christmas present. Lotsalitlparts.
Good eye Rick, PS2-CD High-Side Covered Hopper by Life-Like Products, Proto 2000. Still procrastenating on the Ind. module testing. PaulE
Paul
As always this brings back memories of my modest layout. Good luck with the continued reconstruction..
All the best. Andrew
As always this brings back memories of my modest layout. Good luck with the continued reconstruction..
All the best. Andrew
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.