System Light Dark

Theme editor

Page Setup Appearance

  • Page Width

    Toggle Page Width

    Allows you to change page width values

    Color Pickers

    Toggle color picker

    Allows you to change the color of some predefined items

    Typography

    Select the font you want to use

  • Styles

    Select the style you want to use

    Style variation

    Select the style variation you want to use
    System Light Dark
Scale Model Shop

Icm 1/48 bf 109 f-2

  • Thread starter Thread starter Guest
  • Start date Start date
Status
Not open for further replies.
G

Guest

Guest
Thread owner
After a long time strugling with this kit and it's extremely bad fit issues I decided to just go ahead and slap some paint on the thing as I highly doubt it will get any better.

It is being done in the sceeme of the 109 that the SAAF captured in El Daba 1942 (white 9 9./JG 53) due to fuel shortage abd brakes failure.

The crosses were overpainted (but still visable) and for some reason all the "Hell Blau" sections were re-painted in a sky blue.

The SAAF side # was " ? AX"

I am hoping to get the decals on this weekend after the Future fully cures.

Theuns

View attachment 50324

View attachment 50325

View attachment 50326

View attachment 50327

View attachment 163350

View attachment 163351

View attachment 163352

View attachment 163353
 
Theuns I believe that the crosses were overpainted with Dark Earth,which is slightly darker than the Sandgelb. At least one source reckons that Dark Earth was applied as a disruptive pattern when the aircraft was repainted.

I've found three images with a quick flick through my library. Two show the port side,in one the canopy is covered with a canvass and the other the port rear quarter. I have to say they are not conclusive but in one there is a hint of a demarcation on the fuselage. There are also the Meterlerkamp photos ,and a couple of others,(link below) which you wil probably know being in South Africa!

The trouble is that the two colours don't have much contrast on B+W film.

What colour codes have you got? I'd go with blue but I know people will argue about this :)

I reckon the spinner was re-painted in SA red/orange too.

For those who haven't seen the South African photo collection it is a fantastic record of life at the front,in the desert. There are worse ways to spend a few minutes than looking through these!

http://hannesfaure.yolasite.com/photographs.php

Cheers

Steve
 
Thread owner
Steve, yes the spinner was red with SAAF roundals (orrange centres)

In the meanwhile a slight desaster has struck thid build! I aplied the decals as per usual and brushed some microsol over them expecting them to shrivel up and then lie flat looking painted on (I might have miss understood this part)

Nothing hapened to the decals so I put more sol on, only to see it has eaten the future next toone of the roundals. Don't know how I will fix this, maybe carefully brush on more future and hope it levels out.

The carrierfilm of the decal is still clearly visable, this is confusing me as I thought the sol was supose to totally desolve this.

I actually tried various other makes of decals and they don't really desolve to a point where they look like paint. Can microsol go off or become old???

The future seemed to be fully cured 24 hours in medium temps.

Theuns

ps. my atempt at freehand brushpainting the side# on is also a failure. This is just a BAD build.

View attachment 50328

View attachment 50329

View attachment 50330

View attachment 163354

View attachment 163355

View attachment 163356
 
Many decals need repeated applications of Microsol. I often do three or four over a day. There are some decals that just won't react to anything short of a blow torch!

The decals don't always wrinkle but they do soften nonetheless. It is important not to fiddle with them when they are in this state.

I've never known Microsol to eat into Klear and I've been using it for years. Sometimes it will cause a whitening of the surface of the Klear and this will disappear with another coat of Klear.

I don't think your build looks too shabby at all,hopefully you'll be able to overcome these little hurdles :)

Cheers

Steve
 
Thread owner
I tried to brush on some future to the affected area next to the roundal, hope it will even out and dissapear when the matt goes on.

As for the poor brush work, I will just have to live with it. I did cot out a ? from maskingtape and promplty lifted some paint when I re-positioned it - see how things are going wrong with this!

There is still the finflashes to go on and a few things to add and touchup, then this 109 is going into the case and out of mind LOL!

I will try to add some tamiya flat base to Future as a matt coat, will see how that turns out.

Theuns
 
Thread owner
it is such a strange plane in those markings,i love it all the same,excellent build and mind funk

mobear
 
Thread owner
Yea it just doesn't look right does it! I also see the pitot tube is missing LOL!
 
Looks good Theuns. You could do a series of "Captured by the South Africans" 109s :)

Cheers

Steve
 
I like it theuns , dont be hard on yourself, it looks fine. I wouldnt worry about the code letters either , they were probably hand painted on the full size machine too. cheers tony
 
I like it too. I have seen a photo of this aircraft and it looks like you have nailed it!

Nice one!

Ian M
 
Hi Theuns a very nice but strange looking 109 great job well worth 5 stars
 
Status
Not open for further replies.

Legal Notice

scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.

Currently on our website
Members online
Threads 36,188
Messages 695,628
Members 2,509
Latest member Cusack77
Back
Top