LTD models IAR 80 A in 1/48
- Thread starter yak face
- Start date
Rudder now painted so next is a coat of Klear then I can get the decals on and fit the engine and cowling. 
This has now got the decals on , bit of a trial as they were very fragile , most of the crosses splintering and having to be carefully joined back together. Eventually though they all went on , the only problem now was the yellow I had sprayed under the wings , round the fuselage and on the tail and cowling was too pale . Seeing it next to the decals really highlighted the difference .
Obviously this would have bugged me to death so the only option was to overspray the yellow bits with a more orange yellow . This was successful but a stray bit of masking tape pulled off some of the port underwing cross. I should be able to touch it up though.
Obviously this would have bugged me to death so the only option was to overspray the yellow bits with a more orange yellow . This was successful but a stray bit of masking tape pulled off some of the port underwing cross. I should be able to touch it up though.
Nice paint work on the rudder and wing ends, nice and sharp. A nice looking aircraft Tony.
Great work as ever Tony.
It’s a shame about the decal because the paint scheme was going so well. I’m sure you’ll sort it.
I think I get one of those ‘oh no!’ Incidents in every build. I kind of expect them now! There will always be something along the journey that does not go to plan. Just bite the bullet and get on with it.
Have you a spare cross or will you touch in with paint?
ATB
Paul
It’s a shame about the decal because the paint scheme was going so well. I’m sure you’ll sort it.
I think I get one of those ‘oh no!’ Incidents in every build. I kind of expect them now! There will always be something along the journey that does not go to plan. Just bite the bullet and get on with it.
Have you a spare cross or will you touch in with paint?
ATB
Paul
That is looking pretty impressive. Great colourful paint job and decals.
Nice work Tony, yellow is always a pain but looks like you fixed it well :thumb2:
I’m going to paint it by hand paul , the thin blue and white lines will be a test but masking to get a straight line is a no no so its going to have to be done freehand , cheers tony
Lovely work Tony
I guess that risks pulling more of the decal up.
I've been racking my brain to recall any Romanian crosses that I can give you that would be suitable. I don't think I have any in 1/48. I did spot these on a Google search:
https://www.fantasyprintshop.co.uk/product/rb-d-48-008-romanian-cross-960mm/
Either way, I'm sure that you'll sort the marking issue. :thumb2:
ATB
Paul
G
What about using some Post-It notes to mask it? Cut a few millimetres off the top of the note (to get rid of the dust that always collects there) and it should probably be safe on the decal.
Definitely worth changing the yellow, it would bug me too. Shame about the collateral damage to the decal but I'm sure you'll fix it up just fine.
Thanks for the input guys , I thought I’d first give it a go hand painting , and if that didnt work then maybe some more decals. As it turns out it doesnt look bad at all after a blue faced ,breath holding session with the fine paintbrush! What do you reckon ?
Impressive Tony, your hand is definitely steadier than mine.
Adds to the realism to me. In the field, any damage around large markings would be initially repaired by hand before being given to a larger repair unit for spraying.
Give yourself a big pat on the back and double of whatever is your favourite tipple.
Adds to the realism to me. In the field, any damage around large markings would be initially repaired by hand before being given to a larger repair unit for spraying.
Give yourself a big pat on the back and double of whatever is your favourite tipple.
Now that's what I call "invisible mending". Well done.
Clever beggar aren't you Tony!
Pete
Pete
Been of grid for a while Tony, just caught up on this build.your putting some great work into this, keep up the great work.
Impressive decal rescue Tony. I've done it with shark-mouth markings, but that cross is reasonably complex.
Got the cowling on and its now had a panel line wash and a couple of coats of matt varnish. Highlighting the panel lines was a bit of a job as they are very shallow so it took about four attempts. Every time it came to wiping off the excess I just ended up taking it all off . Also masked up and painted the sliding section of the canopy - the windscreen will be painted later , ive got to drill a hole in it for the strange aerial fixing .
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.