Theme editor

Scale Model Shop

Tamiya 1/20 Tyrrell P34 #20053

I found a good way of bringing the rear brake light to life. I've used a small piece of foil insulation tape and I pressed it against the sheet of mesh that I had to emboss it with a texture. I've then gone over it with red lacquer. It's worked quite well.

Thanks for sharing that tip - very effective and definitely one I'll be storing away for my own use...

Nick
 
Thread owner
I think that's the car more or less there. I'm trying to paint the driver now.
 

Attachments

  • 20261109_115825.webp
    20261109_115825.webp
    437.9 KB · Views: 4
  • 20261109_115844.webp
    20261109_115844.webp
    775.9 KB · Views: 3
  • 20261109_115856.webp
    20261109_115856.webp
    486.9 KB · Views: 4
  • 20261109_115907.webp
    20261109_115907.webp
    408 KB · Views: 5
Looks fantastic, I would never know you had paint/ decals issues.
Did you paint the white Goodyear logos on the tyres and if so how did you do it?
 
Thread owner
Looks fantastic, I would never know you had paint/ decals issues.
Did you paint the white Goodyear logos on the tyres and if so how did you do it?
Thanks Stefee. It's not going to win any prizes, but it's much better than I thought it would turn out.

I used Tamiya XF-2 about 1:1 with thinners and just painted the Goodyear logos with a small brush.
 
Thread owner
The helmet decals were a bit tricky. I've decided that the best way to do his head is basecoat, decals, lacquer then try to do his face followed by the black trim last. I can't see how else to do it.

The kit had decals for the white stripes on his gloves, but I think it was easier to do it with a brush.
 

Attachments

  • 20261109_220618.webp
    20261109_220618.webp
    145.8 KB · Views: 4
  • 20261109_220631.webp
    20261109_220631.webp
    175.1 KB · Views: 5
Thread owner
Mr Depailler at the helm. His eyes aren't very good, I think it takes practice to do faces.
 

Attachments

  • 20261111_192157.webp
    20261111_192157.webp
    390.2 KB · Views: 4
Thread owner
I looked up Patrick Depailler (the fearless man) to see what he was up to these days and found out that he died in a fatal crash in 1980 during testing at Hockenheim aged only 35.

He was driving for Alpha Romeo at the time. I didn't know they ever completed in F1.

 

Attachments

  • Patrick-Depailler-Alfa-Romeo.jpg.webp
    Patrick-Depailler-Alfa-Romeo.jpg.webp
    42.9 KB · Views: 0
Thread owner
I got a couple of photos on daylight. I think he looks ok.
 

Attachments

  • 20261112_133338.webp
    20261112_133338.webp
    350.5 KB · Views: 1
  • 20261112_133627.webp
    20261112_133627.webp
    830.8 KB · Views: 1
Thread owner
I've now turned my attention back to the front splitter supports. I tried using some styrene strip but it was a bit chunky so I'm trying plan b with some acetate sheet from the office. I think it's better although it's going to need a bit of work to get the paint looking good
 

Attachments

  • 20261112_082039.webp
    20261112_082039.webp
    222.2 KB · Views: 1
Thread owner
Sticking them on will also be a challenge. They're really fiddly
 

Attachments

  • 20261112_135616.webp
    20261112_135616.webp
    566.6 KB · Views: 0
Back
Top