discussion Tamiya 1/24 Aston Martin D B S

[Marc Stock]

Tell you what. Its amazing what a bit of practice does. I hated BMF on the 300sl but im really beginning to like the effect. BMF isnt easy especially when you have fingers like sausages but after a bit of practice it beats painting these areas in.


I layed down the bmf in three parts burnished in with cocktail stick folded over and then sealed the whole area with 2 coats of clearcoat on both sides View attachment 248651

View attachment 248652

to stop it from lifting up as the model ages. (The 300sl bmf is starting to lift away in places now)

 

[Guest]

Whats BMF Marc?

 

[Marc Stock]

Sorry its Bare Metal Foil. Its a very thin adhesive foil.

 

[Marc Stock]

Just doing the rear chrome trim. All complete just got the right corner to do but got to help bath the kids. Just noticed a blob of glue that seems to have run out of the rear splitter. So im goint to file that with a pin nose file to reduce the appearance. View attachment 248786

 

[Marc Stock]

Bit more progress. The rear of the body is pretty much complete. Just got to put on numberplate and the reflectors. Cleaned up that blob of glue also and popped in the rear light body trims. Also masked windscren and painted in the black surround and popped in the windscreen wipers.

View attachment 248811

View attachment 248812

View attachment 248813

View attachment 248814

View attachment 248815

View attachment 248816

View attachment 248817

View attachment 248818

 

[Guest]

This is a sweet build, Marc!


And it's nearly done!!

 

[Marc Stock]

Body is nearly done. Got the interior to do and under the car yet and rear brakes

 

[Guest]

beautiful car and you are doing it proud on the build, I will be following this


Peter

 

[Guest]

This is a class build Marc, you're the styrene bodywork master!

 

[Marc Stock]

Rear window painted & installed. Wasnt happy with the wingmirrors so have sanded back again and will give another go over. The black was too glossy and it just wasnt upto the standard I wanted.


Just got the front numberplate to do and the side vents along with wingmirrors and rear reflectors before starting work on underchassis and interior.View attachment 248966

View attachment 248967

View attachment 248968

View attachment 248969

View attachment 248970

View attachment 248971

View attachment 248972

 

[Guest]

I went to order some BMF Marc and they are out of stock! Good job I'm not starting mine for a while. Yours just looks superb mate

 

[Marc Stock]

It doesnt suprise me, its very popular stuff.

 

[Guest]

Lovely looking build so far, you have painted it to a high standard mate, look forward to the finished article.


I'm desperate to get some build time on my Renault 5 turbo and this is making me more frustrated haha maybe at the weekend I can grab a wee bit of time.

 

[Marc Stock]

Thanks dougie. Im quite pleased with it too, i think the paintwork would be slightly better on the original body as more time was spent on prep that the replacement one. But its ok yes and most importantly enjoyable.

 

[Guest]

Check with John if he is getting it back in Mark

 

[Marc Stock]

Rear differential painted and grimed up a little. And my boy wanted to watch and help.

View attachment 249240

View attachment 249241

View attachment 249242

View attachment 249243

 

[Marc Stock]

More progress

View attachment 249244

 

[Marc Stock]

View attachment 249277

View attachment 249278

View attachment 249279

View attachment 249280

View attachment 249281

View attachment 249282

View attachment 249283

View attachment 249284

View attachment 249285

View attachment 249286

View attachment 249287

View attachment 249288

I thought that i would try to make the underside of the car as realistic as possible. I added alot of texture to the underside of the car where the gearbox and differential sit. I did this in a matt black waited for it to go tacky and then stabbed a brush over it to make it look textured. I then did a black powder dust over it before fullly dry to simulate road grime.

The subframes i wanted to look like a real car subframe. So i sanded it down, painted with matt black, then did a brown wash to simulate rust. I then did a black powder dust to tone down and blend and then did some pronunced brown parts by dry brushing certain areas in brown and then finishing off with a semi gloss black on the bits that didnt see rust yet again blended with black powder.


The gearbox cover was a combination of gloss black base and a dry brush of matt black and bolts picked out with silver.


The exhaust pipe was painted with Alclad titanium sliver, buffed to a shine and then a black pinwash on the heatsheild.


The heatsheild i wante to really shine. So for these i used humbrol metalcoat and kept the brush strokes pronunced to make it look like road wear.


The front part were painted matt black with a lot of oil stain to dull it up to look like plastic covers that have seen some road.


Now i am knackered i have been on this since 10 am this morning and now im having a cup of tea

 

[Guest]

Great work on the differing tones especially going to so much detail underneath the model. I think you deserve that cup of tea

 

[Guest]

Awesome work Marc