G
You may think so Andy, but your work is clean and the spraying spot on.
Tamiya 1/6 Honda CRF1000L Africa Twin.
- Thread starter outrunner
- Start date
I'm really in late on this one Andy and your skills are incredible on her. This is turning into a master class bike for sure. I'll try and keep up now that I got my laptop back...
Prost
Allen
Prost
Allen
I got some painting done and started to fit the rest of the decals on the bodywork panels which have just had a coat of Micro Sol so will leave them overnight and see how they settle.
Work was delayed a bit by me making a stupid mistake when painting the front mudguard. As I mentioned in a previous post I painted it with a Halfords rattle can of white which was nothing like the colour required so when the Tamiya paint arrived I sprayed it on, it looked OK so I fitted the decals and gave it a coat of laquer, job done, or so I thought. It became obvious when I painted the other parts that the colour was still not right, the reason being I had forgotten to re-prime the thing with white primer...........clown!
Luckily there are 2 sets of decals to give the choice of 2 colour schemes so I used them to make masks for the existing decals and primed and painted again and I think I may have got away with it, we shall see when the others are laquered, failing that I may go and hide in a corner for a couple of years. Sorry for rambling on but I had to tell someone. :smiling5:
Andy.
Work was delayed a bit by me making a stupid mistake when painting the front mudguard. As I mentioned in a previous post I painted it with a Halfords rattle can of white which was nothing like the colour required so when the Tamiya paint arrived I sprayed it on, it looked OK so I fitted the decals and gave it a coat of laquer, job done, or so I thought. It became obvious when I painted the other parts that the colour was still not right, the reason being I had forgotten to re-prime the thing with white primer...........clown!
Luckily there are 2 sets of decals to give the choice of 2 colour schemes so I used them to make masks for the existing decals and primed and painted again and I think I may have got away with it, we shall see when the others are laquered, failing that I may go and hide in a corner for a couple of years. Sorry for rambling on but I had to tell someone. :smiling5:
Andy.
All looking good from here :thumb2:
Wow you masked over them and resprayed they look really good tbh i never notice un till i read your tread and still I cant see any issues looks great
G
I'm with Simon, looks perfect.
Looking good to me as well Andy.
Nick
Nick
Thanks to all for the kind comments on the work, if it had been a £25 model it may well have been thrown in the bin as I nearly had a heart attack when I realised what I had done but it is such a great, and bl**dy expensive thing, I just had to try and remedy my mistake. I could have just repainted it in the red black and white scheme but it is a bit dull.
I was saved by the kit having 2 sets of decals for the 2 colour schemes so cutting a mask for the front mudguard from the other decal saved the day (I hope), lesson learned, paint ALL the panels at the same time.
Andy.
Nine parts in each caliper is, I think, more than the full size ones...Spent a while building and painting the front brake calipers, 9 parts for each one.
Hard to see but they even have brake pads in them.
Front view with tiny Nissin decals.
Andy.
Andy, you definitely fixed the prob in a most excellent way. You have a great knack for these moto-cycle kits and all the probs that can arise during the build. If a prob can't be fixed, remember those 3 letters, Sir......No, not b-i-n, but m-u-d!!! It covers all of them easily!!!...
Prost
Allen
Prost
Allen
This thing is getting big.
Side panels nearly finished.
The left one looks darker but it's just the light.
A bit of a test to see if I can get the right shade of blue for the tank.
Needs a bit more dark blue added.
Side panel test fitted to see how it looks.
This model will need a BIG case, perhaps I should buy an aquarium.
Andy.
Side panels nearly finished.
The left one looks darker but it's just the light.
A bit of a test to see if I can get the right shade of blue for the tank.
Needs a bit more dark blue added.
Side panel test fitted to see how it looks.
This model will need a BIG case, perhaps I should buy an aquarium.
Andy.
Thats building up very nicely
Looking superb Andy!
Nick
Nick
I'm loving it
Yep agree its a great build can’t wait for the big reveal
I reckon another few hours of fiddly bits and this will be done although I am having trouble getting the decals to lie down properly on the fuel tank.
Exhaust system fitted.
Not too happy with the front pipe colour, seems a bit too blue on the bike so I will probably take it of and mist a bit of clear orange on it.
Yes, I know I did not fill the seam in the frame down tube but unless you are up really close like in the picture it will not seen on the finished model.
Spending too much time on my real bike right now so building is a bit slow.
Andy.
Exhaust system fitted.
Not too happy with the front pipe colour, seems a bit too blue on the bike so I will probably take it of and mist a bit of clear orange on it.
Yes, I know I did not fill the seam in the frame down tube but unless you are up really close like in the picture it will not seen on the finished model.
Spending too much time on my real bike right now so building is a bit slow.
Andy.
In the first picture i thought it was a real bikeI reckon another few hours of fiddly bits and this will be done although I am having trouble getting the decals to lie down properly on the fuel tank.
Exhaust system fitted.
Not too happy with the front pipe colour, seems a bit too blue on the bike so I will probably take it of and mist a bit of clear orange on it.
Yes, I know I did not fill the seam in the frame down tube but unless you are up really close like in the picture it will not seen on the finished model.
Spending too much time on my real bike right now so building is a bit slow.
Andy.
Handlebars all done, 22 parts in that lot.
Tank and side panels test fitted.
Not happy with the tank as some parts of the decals will not settle properly, I did think about stripping them off and painting the parts but decided it would be a nightmare to get the paint mix to exactly match the colour of the other decals so I will put up with it.
I notice on the new Tamiya 1/12 Honda CBR 1000 RR-R thirty year anniversary model they use Cartograf decals so perhaps they have seen the light as far as decals go.
Andy.
Tank and side panels test fitted.
Not happy with the tank as some parts of the decals will not settle properly, I did think about stripping them off and painting the parts but decided it would be a nightmare to get the paint mix to exactly match the colour of the other decals so I will put up with it.
I notice on the new Tamiya 1/12 Honda CBR 1000 RR-R thirty year anniversary model they use Cartograf decals so perhaps they have seen the light as far as decals go.
Andy.
G
Looking an extremely fine build Andy , and with out the use of any mud Think you would enjoy a tank build , any faults out with the mud !
Think you would enjoy a tank build , any faults out with the mud !Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.