Now you’ve got me trying to work out which film the still is from John……
Dog Green. Omaha Beach, 6th June 1944
- Thread starter spanner570
- Start date
G
No Tim, neither have I , at first when looking at the thumb nail I thought the guy on the left was Captain M from Dad's Army .
Just had a check on that photo, nothing other than it was from a photo syndicate.
I recognise a couple of the actors, but can’t remember their names. Looks like it might be depicting Victorian America (hence the quill). Quite possibly one of the Basil Rathbone era Sherlock Holmes films?
G
Good thinking, the quill pen sets the age well .
the quill pen was replaced by the metal nibs by the 19th century. throughout the early 19th century, the usage of the quill pen faded and the quality of metal nibs increased. ballpoint pens also made their mark in the late 19th century, but their patents were not exploited commercially.14 mar 2022
https://en.m.wikiversity.org › wik
Your turn
history of the pen - wikiversity ity
Funny that pen knives stayed in use a lot longer though John…..oh, and quills from the other wing (to that image) were cheaper because they curled into your face and were irritating when in use…..can’t find the image though. It’s royalty free so turns up everywhere.
Thanks for all the great and very funny posts boys. They all keeps me going...
I've started on the beach defences.
I found some thin twigs in the garden. Glued and then bound with sewing thread.
Most of these had Teller Mines fastened to them, so when the L.C.'s ran up the long submerged poles, they came into contact with the mines.......
Cheers.
Ron
I've started on the beach defences.
I found some thin twigs in the garden. Glued and then bound with sewing thread.
Most of these had Teller Mines fastened to them, so when the L.C.'s ran up the long submerged poles, they came into contact with the mines.......
Cheers.
Ron
I've started the base.
I've found some bits of polystyrene, so I've stuck them together and dug out a hole for the L.C.
I've also sprinkled me some nice red building sand. Just the right colour for the beach at 'Dog Green'
The gap between the bands of sand is for a section of deep water which unexpectedly were left behind by the receding tide. These, sometimes being over six feet deep, caught out many a soldier who, when trying to run up the beach in what they thought was shallow water, drowned in them.
The landing craft loosely dug in placed.
I've dropped a slight bollock and positioned the L.C. too close to the bottom of the base. This left me too little room for the beach, so I shifted the vessel back a tad and shoved a bit of scrap polystyrene in the hole in front of the ramp.
I had, what I like to call 'A Happy Accident' when sprinkling on the sand. It left a delightful pitted finish to the beach surface
The basics are laid down.
Cheers.
Ron
I've found some bits of polystyrene, so I've stuck them together and dug out a hole for the L.C.
I've also sprinkled me some nice red building sand. Just the right colour for the beach at 'Dog Green'
The gap between the bands of sand is for a section of deep water which unexpectedly were left behind by the receding tide. These, sometimes being over six feet deep, caught out many a soldier who, when trying to run up the beach in what they thought was shallow water, drowned in them.
The landing craft loosely dug in placed.
I've dropped a slight bollock and positioned the L.C. too close to the bottom of the base. This left me too little room for the beach, so I shifted the vessel back a tad and shoved a bit of scrap polystyrene in the hole in front of the ramp.
I had, what I like to call 'A Happy Accident' when sprinkling on the sand. It left a delightful pitted finish to the beach surface
The basics are laid down.
Cheers.
Ron
Fine progress Ron. Nice to have a "Happy accident", accidents are too often an "Oh s**t" moment.
Will you have to strengthen the base?
Will you have to strengthen the base?
Nice observation Ron. I’ve been there twice, with the tide in both times, so you had me confused at first :thumb2:
Thanks chaps.
Glad you approve thus far.
Jim, good observation!
It will have a piece of 1/4" plywood stuck to the underside. As the poly' is light, this should be thick enough to support the base. It might still crack at the joints. If it does, I'll put in an extra wave to hide it.....
Cheers.
Ron
Glad you approve thus far.
Jim, good observation!
It will have a piece of 1/4" plywood stuck to the underside. As the poly' is light, this should be thick enough to support the base. It might still crack at the joints. If it does, I'll put in an extra wave to hide it.....
Cheers.
Ron
G
Nice 570, and good thinking to save the day with pulling the LC back .Always a heart stopping moment when you suddenly realise what's happened .
453
453
To Dave. I'm scanning the horizon for something suitable....and as you are well aware, I'm a founder member of the 'Cheapskate Club', so of course the kit has to encompass my price range.
Ron
Great scratchin' as always Ron! As you ain't posted results for your horizon scan, I presume you ain't managed to find anythin' for a tanner ?
Andy, Rick, John and Dave. It's taken me around four months to reply to your posts! I'm really sorry.
Anyway, thank you for your comments.
Dave, Just shows how old is my response to the above member messages, that amongst other things, I have entered and completed your excellent G.B.!
I need to finish off this and too many other stalled builds, double quick........Spring is here.
I have now made all the beach obstacles I require. There were others on Omaha, but these will suffice. The 'Ramps' are bits nicked from the wife's flower stuff and some very simple and basic 'Czech Hedgehogs' made from balsa strip. I don't usually use balsa, but as these will be painted and weathered, the too heavy grain won't show. Thus, they will hopefully have a steel look.
I will add the Teller mines to the ramps later.
Small update...
Back to the beach work next.
Thanks for looking in and again, sorry for the huge delay in replying to you good people and the ridiculous gap between build updates.
Cheers.
Ron
Anyway, thank you for your comments.
Dave, Just shows how old is my response to the above member messages, that amongst other things, I have entered and completed your excellent G.B.!
I need to finish off this and too many other stalled builds, double quick........Spring is here.
I have now made all the beach obstacles I require. There were others on Omaha, but these will suffice. The 'Ramps' are bits nicked from the wife's flower stuff and some very simple and basic 'Czech Hedgehogs' made from balsa strip. I don't usually use balsa, but as these will be painted and weathered, the too heavy grain won't show. Thus, they will hopefully have a steel look.
I will add the Teller mines to the ramps later.
Small update...
Back to the beach work next.
Thanks for looking in and again, sorry for the huge delay in replying to you good people and the ridiculous gap between build updates.
Cheers.
Ron
Good to see you back at this Ron.
All the best.
Andrew
All the best.
Andrew
G
Are you sure it's you ?
Thanks Andrew.
453, 'tis lil' old me!
Update....
I've made a start on the waves. The sea state was moderate on the 6th June. The big storms arrived a few days later.
I found some knackered tile grout in the shed. As you can see, way too lumpy to be of any real use, but it will do for the initial forming of the waves.
The tape measure is weighing down the front end of the L.C., so it won't lift whilst the grout goes off.
Very rough and messy work at the minute, I just want to lay the waves down. Hopefully all will be well at the end..........
Cheers.
Ron
453, 'tis lil' old me!
Update....
I've made a start on the waves. The sea state was moderate on the 6th June. The big storms arrived a few days later.
I found some knackered tile grout in the shed. As you can see, way too lumpy to be of any real use, but it will do for the initial forming of the waves.
The tape measure is weighing down the front end of the L.C., so it won't lift whilst the grout goes off.
Very rough and messy work at the minute, I just want to lay the waves down. Hopefully all will be well at the end..........
Cheers.
Ron
G
Must be an old tape 570,see it has 8 feet on the side .
That old tile grout looks good , can imagine that as sea .
That old tile grout looks good , can imagine that as sea .
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.