Theme editor

Scale Model Shop

1/32 Tamiya Vought F4U-1A Corsair

chameleon 2009

New member
Joined
Mar 27, 2012
Messages
1,603
Reaction score
0
Points
0
1/3
Thread owner
Whistling Death. It just sounds badass, doesn’t it? The Corsair, as the F4U built by Vought, or its identical twin the FG-1 (made by Goodyear), is one of the most iconic fighters of World War II. It could out-climb, out-run, and out-fight any propeller-driven aircraft it faced on the opposing side. Known for its distinctive design and huge propeller, the aircraft was also known for the peculiar sound it made at a higher airspeed.
In order to keep the Corsair as aerodynamically clean as possible, designers made sure there was nothing protruding into the surrounding air to produce additional drag. In addition to the innovative “bent-wing” design, the intake for the aircraft’s turbo-supercharger, intercooler, and oil cooler were located in slots in the inboard leading edges of the wings. Air running through those slots at high speeds gave the aircraft a very distinctive sound, and the Japanese tagged the fighter with the moniker, “Whistling Death.”
The facts and figures surrounding the Corsair’s service at war’s end were staggering. Corsairs flew more than 64,000 sorties between the U.S. Navy and U.S. Marine Corps. They accounted for over 2,100 victories in air combat with only 189 losses, producing an overall kill ratio of more than 11:1. It did especially well against the Mitsubishi A6M Zero, with a kill ratio of 12:1 versus that type. The Corsair also dropped 15,621 tons of bombs during the war, a figure approximate to 70% of the total number of bombs dropped by U.S. fighters during the entire war, regardless of theater.
This is an OTB build and to be honest you don't need any after market bits on this, apart from the decals I used, this build I used mission model paints, and I found them rather good.
this build is a dream as the fit is perfect in every way ENJOY.
Mike
 

Attachments

  • IMG_2124.jpg
    IMG_2124.jpg
    4 KB · Views: 0
  • IMG_2125.jpg
    IMG_2125.jpg
    3.4 KB · Views: 0
  • IMG_2131.jpg
    IMG_2131.jpg
    3.6 KB · Views: 0
  • IMG_2132.jpg
    IMG_2132.jpg
    3.4 KB · Views: 0
  • IMG_2133.jpg
    IMG_2133.jpg
    3.6 KB · Views: 0
  • IMG_2134.jpg
    IMG_2134.jpg
    3.6 KB · Views: 0
  • IMG_2135.jpg
    IMG_2135.jpg
    3.5 KB · Views: 0
  • IMG_2136.jpg
    IMG_2136.jpg
    3.6 KB · Views: 0
  • IMG_2137.jpg
    IMG_2137.jpg
    3.5 KB · Views: 0
  • IMG_2138.jpg
    IMG_2138.jpg
    3.5 KB · Views: 0
  • IMG_2139.jpg
    IMG_2139.jpg
    3.5 KB · Views: 0
  • IMG_2140.jpg
    IMG_2140.jpg
    3.4 KB · Views: 0
  • IMG_2141.jpg
    IMG_2141.jpg
    3.5 KB · Views: 0
  • IMG_2142.jpg
    IMG_2142.jpg
    3.6 KB · Views: 0
  • IMG_2143.jpg
    IMG_2143.jpg
    4 KB · Views: 0
  • IMG_2144.jpg
    IMG_2144.jpg
    3.2 KB · Views: 0
  • IMG_2145.jpg
    IMG_2145.jpg
    3 KB · Views: 0
Great model Mike, I like the paintwork & weathering very much! :thumb2:
Steven
 
I particularly liked his weathering and use of colours for it.

Cheers,
Richard
 
Superb work, love the weathering. It certainly is a great kit, possibly the best aircraft kits ever produced in any scale.

I built one of mine as a clipped wing FAA aircraft, an easy conversion if you fancy ever doing one.
 
Missed this one first time around Mike,but I’m glad I’ve seen this now. Cracking work as usual.
 
Back
Top