Theme editor

Scale Model Shop

1/35 T34/76 by TAMIYA 35049 1942 production with metal tracks !

Thread owner
Right, this is where I am up to now.

The base used some dark Tamiya to replicate the soil of Eastern Ukraine. Darker in the riverbed, especially under where the bridge will be, and lastly a mixture of shades on the top of the banks .
2026.webp
2026_2.webp
Now the T34

2026_5.webpThe hull.
2026_4.webp
2026_3.webp
The Fruil tracks are just laid on, need to trim the ends down .

Tomorrow, that chipping fluid, and the winter wash!

John.
 
I've had reactions when I've mixed other paints with Tamiya, I think its cos they are not water based acrylics like most others.
The dio is looking really good mate..... (y)
 
Thread owner
Looking very nice John.
Thanks Joe.
I've had reactions when I've mixed other paints with Tamiya, I think its cos they are not water based acrylics like most others.
The dio is looking really good mate..... (y)
Cheers, Peter. I agree; stick to one type!
 
Thread owner
Love that winter whitewash. Looks really good.
Thanks Jim .
Looks really good, How did you get the chipping effect? cheers
Hi Peter, after the top coat, I sprayed a thin coat of AK Heavy Chipping Fluid. Once dry, I sprayed a coat of TAMIYA XF WHITE. I
didn't leave it for too long, other wise it would have been nigh impossible to remove. Wet the surface with clean water, then start dabbing and, on vertical slopes, use a small, stiff brush to remove downward.
Today I sprayed the whole model with Tamiya X22 clear; I'll let it dry for a further 24 hrs, then apply an oil wash to pick out detail. Hope this helps.
Very convincing paint work John. Did you use chipping fluid or some form of magic?

:ROFLMAO: Yes, see my answer above to Peter.
 
Thanks Jim .
Hi Peter, after the top coat, I sprayed a thin coat of AK Heavy Chipping Fluid. Once dry, I sprayed a coat of TAMIYA XF WHITE. I
didn't leave it for too long, other wise it would have been nigh impossible to remove. Wet the surface with clean water, then start dabbing and, on vertical slopes, use a small, stiff brush to remove downward.
Today I sprayed the whole model with Tamiya X22 clear; I'll let it dry for a further 24 hrs, then apply an oil wash to pick out detail. Hope this helps.
:ROFLMAO: Yes, see my answer above to Peter.
Ah good, thanx for the explanation. I have some chipping fluid, can't remember which one, I bought it ages ago, but have been too scared to use it! You've inspired me to give it a go next time I do a suitable vehicle.... :) (y)
 
Thread owner
Always great to hear from you Richard when you comment on the channel. I wish you all the best and I am sure we will speak soon. Take care my friend
 
Thread owner
With the use of resin about to appear it was time to seal the river base really well . Ive already used some PVA and applied a nother coat of paint, hence the strange look.

Taking some clear plastic strip, I've started to seal the base all over, this time with AK Still water. This is a perfect way to seal the base before applying the resin. Hopefully this has worked.

I'll do another paint application over this as there are some varying shades with the PVA !

2026_8.webp2026_7.webp2026_6.webp
Mind looking at it now? It looks like sheets of ice !!!!

John.
 
Back
Top