discussion 1/48 Sea Gladiator

[colin m]

Don't look too closely at the instruments Joe.Ive not tried to replicate the exact instruments. Just used any that were the correct size.

I've done that before, as long as it's black and white and fits in - that's where it's going.

Anyway, all looking very nice Dave.

 

[papa 695]

Just seen this Dave looking very good so far

 

[Dave W]

Tonight I've filled and sanded the fuselage seems.Then I glued the outer wing struts on.Before they had completely set,I positioned the upper wing on them and waited for the glue to set before removing the wing.Then I managed to break two of the wing to fuselage struts whilst trying very carefully to clean them up.The plastic in this kit is quite brittle.But it does respond well to my usual Revell contacta glue.So I've glued them back together.Ive got some thin brass rod.So I may replace them with it.

View attachment 70683


View attachment 70684


View attachment 183707

View attachment 183708

 

[Dave W]

A bit more done this evening .Windscreen and rear canopy masked and glued onto model.Also undercarriage legs attached.

 

[colin m]

Oh no, wing alignment - my thoughts are with you.

 

[flyjoe180]

Looks more like a Gladiator now Dave.

 

[Dave W]

Tonight I've sprayed a coat of primer on the model.And I've attached the 18 tiny exhausts that go from the engine cylinder heads to the cowling.Not sure what colour they should be.The instructions say aluminium.But a build review of the kit has them painted bronze.

 

[Guest]

all looks good to me Dave

 

[colin m]

I do like a detailed engine. I would have thought the exhaust pipes would have been the same or a very similar colour as the collector ring.

 

[Dave W]

I'm at the painting stage now.Got the Dark Slate Grey on and masked the model for the next colour Extra dark Sea Grey.

 

[Dave W]

Extra Dark Sea Grey sprayed on this evening and masking removed.Going to spray light grey on the fuselage next.

View attachment 71474


View attachment 184497

 

[flyjoe180]

The Gladiator is looking good Dave.

 

[Guest]

This is coming along well mate. Starting to look the goods.

 

[Dave W]

More masking.This time for spraying first coat if light grey on the fuselage and engine cowling.

 

[Guest]

IP and office are looking great ,especially like those belts Dave .

 

[yak face]

Looking good dave , those exhaust stubs look very fiddly , i bet they were a bugger to clean up! cheers tony

 

[Dave W]

Thanks Trey and Tony.Exhausts were not too bad.i managed to clean them up without any pinging out of the tweezers across my shed as well!.Need to get some thick fishing line for the rigging now.Was going to use plastic strip.But I think any movement of the wing would pull the strip off.So I'm going to drill part way into the upper wing and attach fishing line with CA.Then I will drill all the way through the lower wing,pull the line through and secure with CA.To finish I will trim the line flush with the underside,fill and touch up the paint.Thats the plan anyway.

 

[colin m]

There's always something nice about getting a bit of paint down. Looking good Dave.

 

[papa 695]

Some stirling work Dave looking good

 

[Guest]

Looking good Dave rather you than me doing the rigging.