Hi Richard
Now that's what I call detail painting. 1/700 scale - that's incredible.
Jim
Now that's what I call detail painting. 1/700 scale - that's incredible.
Jim
1/700 scale IJN Ships make over
- Thread starter rtfoe
- Start date
Thanks Jim, with Vallejo acrylics and not rushing it is very enjoyable to detail paint in thin coats and slowly building up the weathering effects. The ships are going to be the next fun subject for weathering with acrylics.
Cheers,
Richard
Hi John...must be strong glue you're using. Glad you like what's going on. I have an end June deadline if I can make it.
Cheers,
Richard
Cheers,
Richard
Damn that's good Richard!!
Very well done indeed.
ATB.
Andrew
Very well done indeed.
ATB.
Andrew
Thanks John and Andrew...didn't see the replies.
Cheers,
Richard
I tend to revisit my dios that have been neglected and improve or add detail that I have learned through the years. This dio is easily 20 years in the making and was stalled by PE and rigging which caused me to work on the harbour more. Glad you like it.
Sometimes I sit back and marvel at what I have achieved. Don't think I'd be able to do it all over again.
Cheers,
Richard
The right side of the dockyard kind of looked empty so I decided to add oil storage facilities. It's a small wedge of space so I sawed the Tamiya oil storage structure using less than a quarter of it.
The flat surface needed detail so I will add stairs to the side and railing at the top...you can see I have marked out in pencil where the stairs will go.
I've got the platforms cut out similar to the what's on the giant crane legs. I'm using PE for the oil container and solid stairs which I have engraved on a piece of plastic strip that will be sliced and cut into correct lengths. PE railing will be attached to the sides.
Lots of work to be done on the giant crane with cabling and hook.
Cheers,
Richard
The flat surface needed detail so I will add stairs to the side and railing at the top...you can see I have marked out in pencil where the stairs will go.
I've got the platforms cut out similar to the what's on the giant crane legs. I'm using PE for the oil container and solid stairs which I have engraved on a piece of plastic strip that will be sliced and cut into correct lengths. PE railing will be attached to the sides.
Lots of work to be done on the giant crane with cabling and hook.
Cheers,
Richard
I added backing to the cut side of the oil storage tank with plastic card and a bit of plastic putty filler.
Then did a crazy thing by adding weld beads for the sheet walls of the tank...
Cheers,
Richard
Then did a crazy thing by adding weld beads for the sheet walls of the tank...
Cheers,
Richard
Okay...a bit more today...fitted in the platform and zig zag stairs and railings to the top but still needs railings to the individual platforms. The bottom lip had to be sliced off to fit the spot intended. I didn't compensate for the extra bit of the backing.
Cheers,
Richard
Cheers,
Richard
Good Golly Richard!!! I just did a ketchup on this with the optivisor on. This is most beautiful and exquisite work Sir. Micro madness at it's best!!! It's no wonder you have to take a break from it as if you didn't, you'd go blind for sure.............
Prost
Allen
Prost
Allen
Thanks Allen, good to have you back and yeah I am struggling with the eyes even with the magnifiers the focus goes blurr if I stare more than 10 minutes at the object that I'm working on.
I'm also working on the giant crane stairs...
Got the engaved stair s placed and will add the railings.
Cheers,
Richard
Jim, I keep telling you guys I've got this shrinking ray gun. :smiling6: ...just don't tell anyone else.
Cheers,
Richard
Wow, just wow!!! That's tiny.
Great work.
Cracking work Richard.
Richard,
Cracking work mate.
Cracking work mate.
Thanks guys...I just did the platform railings. The close ups make the whole assembly all wobbly and messy.
All it needs now is a coat of primer. Then painted in sliver with weathering streaks and rust.
Cheers,
Richard
All it needs now is a coat of primer. Then painted in sliver with weathering streaks and rust.
Cheers,
Richard
A bit more done just now on the giant crane with railings and ladders...
I added a door at the end of the walkway. The kit doesn't show any way into the work house so I'm improvising. I'm sure there is a way in but was too lazy to search for reference and not too worried of riveteers. Might do another walkway and door on the opposite side...perhaps entering higher to another floor level with stairs leading to it from the walkway...that would be interesting. I can really go bonkers with this.
Cheers,
Richard
I added a door at the end of the walkway. The kit doesn't show any way into the work house so I'm improvising. I'm sure there is a way in but was too lazy to search for reference and not too worried of riveteers. Might do another walkway and door on the opposite side...perhaps entering higher to another floor level with stairs leading to it from the walkway...that would be interesting. I can really go bonkers with this.
Cheers,
Richard
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.