System Light Dark

Theme editor

Page Setup Appearance

  • Page Width

    Toggle Page Width

    Allows you to change page width values

    Color Pickers

    Toggle color picker

    Allows you to change the color of some predefined items

    Typography

    Select the font you want to use

  • Styles

    Select the style you want to use

    Style variation

    Select the style variation you want to use
    System Light Dark
Scale Model Shop

Latest Acquisitions (2021)

adt70hk said:
Morning all

So some arrivals this week.....

ATB.

Andrew

------------------------------

I don't play golf.....but our very own Tim Marlow has demonstrated just how good these are for putting small figures on when painting. In fact so good, this is my second batch.....I should have ordered a bigger batch last time!:smiling5: They're also wood and so will rot down if it ever comes to it.





Next up two purchases that mysteriously got ordered but means unknown........I'm blaming my phone....... ;)


First up, another addition for my 'Hunters and Hunted' collection. I'm blaming AlanG for this, after he introduced me the German 'Wilde Sau' night fighter concept.





Secondly, I have been thinking about getting a Beaufighter for a while, as it's one of my favourite planes and so finally plumped on this....
Click to expand...
EXCELLENT!! :cool:
So you finally surrendered and got a Beaufighter eh Andrew?!!......nice one:thumb2:.I know you`ve wanted one for a while;),
Hope you post up your progress with it,i`d like to watch it come together.
Andy
 
Tim Marlow said:
How many figures are you intend to paint at a time Andrew? I get by with a dozen tees, but you must have about forty :thinking:
Not sure how you base your figures? I use 1p or 2p pieces because most of mine are plastic these days, and it adds a bit of stability to the finished gaming piece. These coins have been coated steel for around twenty years. I therefore glued magnets to the top of the tees and have been able to ditch the use of blue tack for holding them on while painting. They now just click on and click off.
Nice aeroplane kits by the way…..
Click to expand...
Hi Tim.

It's actually 50 tees.. :surprised: :surprised:. I really don't need that many but I have been on a major catch up on my figure painting and so ran out - but more about that later. Because I've never taken figures seriously and to be honest had a bit of phobia, I've never based them properly before. Having nothing better to hand, I've been using 1p and 2p coins on the ones I've done recently, like you. Can you send me a PM re the magnets you use. sounds much better than blue tack!

And thanks for the comments on the planes. I've already got one of the AZ model G-6s but I think it was the wrong decals for what I want to do. As for the Beaufighter the Airfix tooling is pretty new and supposedly the best on the market at this scale.

Thanks.

Andrew
 
The Smythe Meister said:
EXCELLENT!! :cool:
So you finally surrendered and got a Beaufighter eh Andrew?!!......nice one:thumb2:.I know you`ve wanted one for a while;),
Hope you post up your progress with it,i`d like to watch it come together.
Andy
Click to expand...
Thanks Andy! Indeed I have - what a weak man I am!

What I forgot to mention was that my mum paid for the kits in the end. I had ordered them to her house in error due to a previous order I'd sent there.

She's about to move and as she's in her late 70s I've been helping her a lot with clearing out (my brother did most of that though) and paperwork (my area of expertise), so she ended up giving me the money for them yesterday and so now I have £30 burning a whole in my wallet as we speak!! ;):smiling5:

ATB.

Andrew
 
A few bits and bobs.
Ordered in the morning and posted by lunchtime, thank you SMS20210612_120708.jpg
 
Mark1 said:
A few bits and bobs.
Click to expand...
Hey Mark,
Could you let me know what you think of that Pin Vice please?..... I`ve been needing a new one for a while,but a couple i bought weren`t very good...... the jaws were very "Hit and Miss" when it came to gripping the drill bit.
Cheers,
Andy
 
The Smythe Meister said:
Hey Mark,
Could you let me know what you think of that Pin Vice please?..... I`ve been needing a new one for a while,but a couple i bought weren`t very good...... the jaws were very "Hit and Miss" when it came to gripping the drill bit.
Cheers,
Andy
Click to expand...
Will do, I've got an archamedis drill for that, this will be just for holding stuff.
 
The Smythe Meister said:
Hey Mark,
Could you let me know what you think of that Pin Vice please?..... I`ve been needing a new one for a while,but a couple i bought weren`t very good...... the jaws were very "Hit and Miss" when it came to gripping the drill bit.
Cheers,
Andy
Click to expand...
Just tried a 0.5 drill,seems to hold nice and snug , it has reverseable collets so you can go from 0 up to 2.9 mm and is all metal,so far seems like a good buy :thumb2:
 
The Smythe Meister said:
Hey Mark,
Could you let me know what you think of that Pin Vice please?..... I`ve been needing a new one for a while,but a couple i bought weren`t very good...... the jaws were very "Hit and Miss" when it came to gripping the drill bit.
Cheers,
Andy
Click to expand...
Mark1 said:
Just tried a 0.5 drill,seems to hold nice and snug , it has reverseable collets so you can go from 0 up to 2.9 mm and is all metal,so far seems like a good buy :thumb2:
Click to expand...

Mark, Bob

I've had a couple of these for several years and they generally work very well. Nothing flashy, just do what they do.

There are a couple of minor things you need to be aware of.

One is that if you're drilling into something herd you can still push the drill bit in if it's not properly tightened and occasionally even if it is

The other is that you will a few drill sizes are slightly too small for one size of vice but slightly too big for the next size down, so you have to wiggle it a bit to get them in.

HTH.

Andrew
 
Hi Andy et al….The collets in the pin vice are designed for a certain range of drill sizes. If you want to cover all bases you will need several, or a pin vice with interchangeable collets.
 
Tim Marlow said:
Hi Andy et al….The collets in the pin vice are designed for a certain range of drill sizes. If you want to cover all bases you will need several, or a pin vice with interchangeable collets.
Click to expand...
Exactly what I thinking..... Not that I knew the proper name, nor could I seem to find the words for what I was trying to say, so thanks for the proper lingo!
 
Never seem to see the likes of those over here Lee. Glad to see your mojo up again .
 
Mark1 said:
Just tried a 0.5 drill,seems to hold nice and snug , it has reverseable collets so you can go from 0 up to 2.9 mm and is all metal,so far seems like a good buy :thumb2:
Click to expand...
Thanks for that Mark,
Very useful info,I think I'll get one :)
Andy
 
You must log in or register to reply here.

Legal Notice

scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.

Currently on our website
Members online
Threads 36,209
Messages 695,860
Members 2,514
Latest member gwagmoli
Back
Top