discussion Mission Complete WIP of completed vignette.

[rtfoe]

Hi Guys,
I have posted the finished vignette under completed dioramas...



Now here is the WIP inspired by what I've seen in the movie Where Eagles Dare. The characters are not accurately depicted but just wanted a scene reminiscent of it. It's two saboteurs escaping after a successful mission. They're riding in tandem on a motorbike. The setting will be in winter. Much of the work will be done in modifying and scratching the two figures. The base figure is from the Tamiya German Motorcycle Orderly set. I had already assembled it so will need to break it down again...



The rider will become the back seater and I will have to scratch the new rider in a more dramatic pose of riding. I will use this head and redoing the goggles configuration and making him wear it instead and cut off the peak flap and make a new one flat against his forehead from the wind gust. This will be done with putty later with straps added.



The riding pose was a challenge using paper clip armatures. In hindsight I should have use more pliable wire. Satisfied with that I worked on the back seater cutting and twisting his body arms and legs. Putty will smoothen the joints and folds out later.



More later as I progressed...

Cheers,
Richard aka Wabble

 

[rtfoe]

Hi,
I beefed up the armatures with putty to hold it in place and a bit on the passenger as well. Also roughly positioned the passengers head and when I'm satisfied I lock it in with CA.



Did the removing of the wheel spokes and continued...should help with the moving illusion if executed well.

I had an experience the other day that delayed any bench time. My cat decided to do an Olympic dive into the pail of water I was mopping with and spread water all over the place. The judges gave her an 8 out of 10 score...I chased her out of the kitchen. The rest of the cats went helter skelter and left me with more work to do. So no WIP for that moment.

Cheers,
Wabble

 

[rtfoe]

Hi, when at the Planet I learnt a new method of making armatures. I had previously just used wire for my monkeys seen in my Ambush dio WIP. This time using two sprues for the pelvic and shoulders cut to the right length and giving room for the putty, five wires for the limbs and torso. Definitely helped with getting the riders posture right and the wires less fiddly.



Got the right leg of the passenger done but needed to adjust his footing to the pedestal. The torso of the rider was given a base shape. Also the riders head has been puttied.

It took me two months of procrastination to start this suffering nerves that I wouldn't be able to do it and now it's taken less than a week to get to this stage. Kicking myself for not starting earlier.

Cheers,
Wabble

 

[Jim R]

Great skill needed to scratch or adapt figures.

 

[rtfoe]

Great skill needed to scratch or adapt figures.

Perhaps Jim but I believe it is possible for anyone to sculpt a figure if they have the right approach, reference and tools to make a start.

Also to patiently work in stages. I've place the hands holding the bar handles or is it a steering yoke? Plonked on the head, wanted to shorten the neck a bit but needed opinions as to how low can the head go and how much can the neck stretch for him to see forward I would have liked to make it lower than it is and as exaggerated as possible.



I did get some feedback as you will see the alterations later.

Cheers,
Wabble

 

[rtfoe]

Hi Guys,
Adjustments from comments done and also did some puttying for the left side of the rider and right hand of the the passenger...



Spokes have been cleaned. Found a resin hand to hold the Schmeisser machine gun.

Cheers,
Wabble

 

[yak face]

Amazing work richard , off to find the completed pics now , cheers tony

 

[rtfoe]

Amazing work richard , off to find the completed pics now , cheers tony

Thanks Tony, would have liked to have spent more time on the painting though.

Anyway here's more of the WIP...
Sat down and tackled the riders front and right side of the body...I learnt to work in stages to let the putty cure in between sessions. Also to have the figures unattached and workable... details added were the collar and lapel, shoulder tabs...



I abandoned using the resin hand and opted for a plastic spare hand from the parts box, cut the fingers, deepened the palm, reworked the thumb and fingers with putty and then cut it at the wrist.



Okay this guy isn't doing a Michael Jackson...he's just grabbing the seat handle bar. I remodified the existing arm to get the right angle, removed the hand and replaced it with the one I had resculpted holding the MP40 Schmeisser.



Only Clint can pull off holding a Schmeisser like that...

Cheers,
Wabble

 

[scottie3158]

Great figure work mate and trust me not anyone can do it.

 

[rtfoe]

Great figure work mate and trust me not anyone can do it.

Thanks Paul, I bet there is. There is an abundant amount of hidden talent that is to be discovered amongst our friends here.

Now back to the WIP.

Clint had Vidal Sasoon do his hair and while blowing his hair I got him to give the figure a blast of air...



The blast of air got his collar lapels lifted and part of his tunic too.

While contemplating the base I had fun on the work table...



Never thought of putting them on a side car with a third passenger...hmmm...

Cheers,
Wabble

 

[stillp]

Clint had Vidal Sasoon do his hair and while blowing his hair I got him to give the figure a blast of air...



The blast of air got his collar lapels lifted and part of his tunic too.

Now that's the sort of detail that wins prizes!
Pete

 

[toto]

Wow