If she hasn't he'll scratch some out of Green Stuff.
SimonT - "Does my bum look big in this?" A wee lass in an armoured battle suit
- Thread starter SimonT
- Start date
Jakko - that is great. Must have taken some time and considerable cost to build. Even better, the vid is backed by one of my favourite bands Sabaton :thumb2: The three bodyguards in red capes are rather nice as well
Karl - not by my reckoning :thinking: An 80mm figure height at 1/18 would make them only around 4ft 8", still rather on the short side
Can't see her lugs for hair but I am assuming she is not a fairy
John - no, no tracks on this one. When you think about it though a personal tracked and armed vehicle would probably make much more sense rather than having to sort the complicated matter of making a walking machine that is stable over all terrain
Tim - no pewter on this one, shock horror
Steve - no it isn't having a bucket, silly boy
Richard - no rivets or welds either. All very strange
Mick - not too far off paint now......
Jim - ears are covered by hair so they can be any shape you want
destroyed three CD cases and various transparent packing plastics trying to make the canopy - the above are just a small sample of the failures
The CD cases were the best quality plastic and seemed most likely to work but, as per my previous attempts at plug moulding, results were variable. Most attempts ended in failure - holes, too thin in places, burnt edges, wonky shapes
I did however get one that came out roughly canopy shaped - canopy for what I am not sure but it wasn't for this!
After a bit of sanding I had something canopy like, it just didn't really fit the complicated rear edge of the frame so, I decided it would be easier to modify the frame to fit the canopy
the frame got some button/light panels and the rear edge of the frame modified with lots of short sections of square rod to change the shape. It was all blended together with filler and sanded down
the canopy has a few marks so will have to polish it - not too critical though as I will be tinting it with clear orange paint
canopy loosely back in place - it has been stuck down and pulled off three times now. Hopefully the next time will be the last
apart from tidying I think assembly is now complete
Karl - not by my reckoning :thinking: An 80mm figure height at 1/18 would make them only around 4ft 8", still rather on the short side
Can't see her lugs for hair but I am assuming she is not a fairy
John - no, no tracks on this one. When you think about it though a personal tracked and armed vehicle would probably make much more sense rather than having to sort the complicated matter of making a walking machine that is stable over all terrain
Tim - no pewter on this one, shock horror
Steve - no it isn't having a bucket, silly boy
Richard - no rivets or welds either. All very strange
Mick - not too far off paint now......
Jim - ears are covered by hair so they can be any shape you want
destroyed three CD cases and various transparent packing plastics trying to make the canopy - the above are just a small sample of the failures
The CD cases were the best quality plastic and seemed most likely to work but, as per my previous attempts at plug moulding, results were variable. Most attempts ended in failure - holes, too thin in places, burnt edges, wonky shapes
I did however get one that came out roughly canopy shaped - canopy for what I am not sure but it wasn't for this!
After a bit of sanding I had something canopy like, it just didn't really fit the complicated rear edge of the frame so, I decided it would be easier to modify the frame to fit the canopy
the frame got some button/light panels and the rear edge of the frame modified with lots of short sections of square rod to change the shape. It was all blended together with filler and sanded down
the canopy has a few marks so will have to polish it - not too critical though as I will be tinting it with clear orange paint
canopy loosely back in place - it has been stuck down and pulled off three times now. Hopefully the next time will be the last
apart from tidying I think assembly is now complete
G
I noticed the fingers of the hands move, so it’s probably even more complicated than it already looks.
I was kind of surprised to see that many Sisters of Battle cosplayers …The three bodyguards in red capes are rather nice as well
It’s simply that walkers are cooler. As military machines they make no sense whatsoever compared to tanks, but they look cooler to many SF buffs.
Luckily the material isn’t too difficult to come by
Looking good, though
Looking very good Simon. Great work on the canopy and frame.
Are you sure Mr T?? I still cant see a bucket and cloth. She really is going to need one of she is going to keep that canopy clean.
G
Is she taking applications?
It's ok - the canopy is treated with a special coating containing millions of constantly moving wash wipe nano-bots
Each bot has its own built in BnM-0002-EZ/CL/EEN-3.0 bucket and mop system
The bucket is fitted with the latest XDF/43-X564-FF-76a cleaning fluid recycling processor that refreshes the bucket each time it fills up with dirty fluid
or something
Each bot has its own built in BnM-0002-EZ/CL/EEN-3.0 bucket and mop system
The bucket is fitted with the latest XDF/43-X564-FF-76a cleaning fluid recycling processor that refreshes the bucket each time it fills up with dirty fluid
or something
G
I've seen a few people complain about the one shot bottles, but loving the product itself. God knows why they didn't just stick their own label on the original stynylrez bottles as ump did, they seem much better.
I've only tried the white so far (in badger guise) but have to admit it's pretty good, almost good enough to tempt me away from Mr Surfacer, and a vastly better than the Vallejo stuff I tried.
I've only tried the white so far (in badger guise) but have to admit it's pretty good, almost good enough to tempt me away from Mr Surfacer, and a vastly better than the Vallejo stuff I tried.
G
Seeing Andy has mentioned that link with Badger, I was surprised to see a case of it stacked up on a tour of the badger factory video. Simons quite right, I got so fed up with that lid and hurling paint everywhere I now remove the top and pour it out.
Andy - didn't know it was stynylrez by another name. UMP?
John - those flip lids are useless for the user. Quite good for the seller as you waste most of the paint and have to buy another one. I agree, taking the top off is much less wasteful
Friday night I sprayed the suit with Tamiya flat aluminium - actually turned out quite bright and shiny
I was going to just paint it like a tank - green shades over the silver then chipped
However, as I reached for the green my inner Tony Stark took over and I went and sprayed it in Tamiya clear red instead
I think it will get a semi gloss varnish for an anodised type finish
it doesn't really matter that it would stand out a tad in red - at around 4m tall it isn't exactly inconspicuous
anyway, you just push the stealth mode button and the adaptive camouflage will hide it
this is the canopy with its clear orange coating - it is sat on black panzer putty stuff at the moment so should be a little more translucent
what does anyone think - leave it red or go green?
John - those flip lids are useless for the user. Quite good for the seller as you waste most of the paint and have to buy another one. I agree, taking the top off is much less wasteful
Friday night I sprayed the suit with Tamiya flat aluminium - actually turned out quite bright and shiny
I was going to just paint it like a tank - green shades over the silver then chipped
However, as I reached for the green my inner Tony Stark took over and I went and sprayed it in Tamiya clear red instead
I think it will get a semi gloss varnish for an anodised type finish
it doesn't really matter that it would stand out a tad in red - at around 4m tall it isn't exactly inconspicuous
anyway, you just push the stealth mode button and the adaptive camouflage will hide it
this is the canopy with its clear orange coating - it is sat on black panzer putty stuff at the moment so should be a little more translucent
what does anyone think - leave it red or go green?
G
I like the red, very different.
For me it's a bit too much at the moment but I'm guessing you'll be painting some of the details like weapons & hoses in other colours.
Sorry about the primer comment. It's pretty common knowledge elsewhere so figured it would be here too. The owner of Badger talks about the "collaboration" in the video John mentioned, so it's not just rumour.
UMP is a rival retailer so won't say any more to be fair to John , but they openly admit their primer is rebranded stynylrez too.
For me it's a bit too much at the moment but I'm guessing you'll be painting some of the details like weapons & hoses in other colours.
Sorry about the primer comment. It's pretty common knowledge elsewhere so figured it would be here too. The owner of Badger talks about the "collaboration" in the video John mentioned, so it's not just rumour.
UMP is a rival retailer so won't say any more to be fair to John , but they openly admit their primer is rebranded stynylrez too.
Nice project Mr T
Hi Simon
I like the red and as Andy says it will be broken up with detail painting.
Jim
I like the red and as Andy says it will be broken up with detail painting.
Jim
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.