discussion Tamiya 1/48 F16C Fighting Falcon Block32

[Guest]

Just had a read through Mick , she's starting to take shape and looking good . Can't comment on the canopy other than think it looks good. Bit different from Russian Armour I think .:smiling2:

 

[colin m]

Looking great Mick. Canopies ehh- no problem !

 

[Mini Me]

Like JR, I've just run through this as well.......nice build so far and the canopy work is excellent...considering it's your first attempt I'd say you have a pretty good handle on it. Now you can announce to SWMBO that you have reached Manhood! :tongue-out3: :tongue-out3::thumb2: Rick H.

 

[boatman]

HI Mick ive only just caught up on your build an you are doin a great job of it an like Rick SAYS YOU have reached manhood so that should keep swmbo quiet lol
chris

 

[Guest]

One of the modellers replaced the missiles with replacement resin ones as he didn’t want to be wasting time getting them smooth after assembly.

Ah, laziness plus spendthrift, then.

 

[Mickc1440]

Still waiting for the weather to improve so I can start on the big paint jobs. Still undercoating small bits but decided to crack on with the tail fin. This is a stand alone assembly that attaches to the model on two metal rivets using rubber grommets. One side done and hopefully the other later when it’s all dry then there’s a clear part to go on then I just need to make up some very thin little probes, I think they are,to attach, same on the rear fins too.

 

[boatman]

OH love that tail fin Mick very well done look superb
chris

 

[Mickc1440]

Now the storms have abated I managed to get some spraying done. All three main colours done so on to the more detailed jobs. Unfortunately my phone camera lightens the paint a bit too much, will try again when I get a bit further.

 

[Mini Me]

Looking good so far Mick. :thumb2:

 

[Guest]

Yes, looking good as Rick says, bet your pleased to be able to get some paint on Mick.

 

[yak face]

Still waiting for the weather to improve so I can start on the big paint jobs. Still undercoating small bits but decided to crack on with the tail fin. This is a stand alone assembly that attaches to the model on two metal rivets using rubber grommets. One side done and hopefully the other later when it’s all dry then there’s a clear part to go on then I just need to make up some very thin little probes, I think they are,to attach, same on the rear fins too.

When you say thin little probes do you mean the sets of three on the rear edge of the fin and elevons ? If so they are the static dump wicks , theres three on each wing too . Are they included in the etch set mick ?if not I usually use toothbrush bristles stuck on with a tiny dab of CA ,then when dry a little blob of pva on the end . Looking mighty fine now , cheers tony

 

[adt70hk]

Mick,

That is coming on very very nicely. Love the tailplane!!

Keep up the great work.

ATB.

Andrew

 

[Mickc1440]

When you say thin little probes do you mean the sets of three on the rear edge of the fin and elevons ? If so they are the static dump wicks , theres three on each wing too . Are they included in the etch set mick ?if not I usually use toothbrush bristles stuck on with a tiny dab of CA ,then when dry a little blob of pva on the end . Looking mighty fine now , cheers tony

Hi Tony, yes they're the ones, I saw a guy fitting them on a build blog, there's nothing in the kit or my etch but you can see on the model itself where they are supposed to fit so I too will improvise.
Rick JR and Andrew, many thanks for looking in.

 

[Mickc1440]

Caught an old fashioned cold and it floored me for four days so lost all that time at the desk. Since managed some progress so I now have the wheels on, endercarriage doors fitted and clear coat on ready for the decals.

 

[boatman]

HI Mick lovely job so far but what are them pins for on the tail ?
chris

 

[Jim R]

Hi Mick
Hope the cold's better. Trouble these days is every cough and sneeze and we think "is it???" :rolling:
Falcon is looking good. I like the tail. Interesting way of fixing it. Nice looking paint job. Decals will make this pop.
Jim

 

[Mickc1440]

HI Mick lovely job so far but what are them pins for on the tail ?
chris

The tail fin doesn't glue on, those pins locate in rubber grommets inside the fin. There are also some for the belly tank and wing tanks. The 1/32 scale F-16 I've just bought has quite a few more of these so you can store the model if there's no room to display it, it's box converts into a storage box.

 

[Geoffers]

Looking very nice Mick :thumb2:

Geoff.

 

[Mickc1440]

After over 2 hours work I have most of the decals on. Apart for one around the refuelling housing and the airforce insignia everything else is tiny. Unfortunately 2 of the most prominent cockpit side decals just disintegrated in the water, I’ve sourced some replacements which should arrive in the next couple of days. I can then give it another clear coat and do some weathering.