System Light Dark

Theme editor

Page Setup Appearance

  • Page Width

    Toggle Page Width

    Allows you to change page width values

    Color Pickers

    Toggle color picker

    Allows you to change the color of some predefined items

    Typography

    Select the font you want to use

  • Styles

    Select the style you want to use

    Style variation

    Select the style variation you want to use
    System Light Dark
Scale Model Shop

Trumpeter 1/35 Baureihe 52 mit Steifrahmentender

More great work Jack. Brass is a bit of a pig to solder as it transmits heat so readily so soldering those steps must have been fun. Did you use the old trick of wrapping the earlier joints in damp tissue so that only the new joint you were trying to make got hot enough to melt solder?
 
Looking really good Jack.
PE :thumb2::thumb2::thumb2: and the copper threaded out like that !
Love the variation on the coal unit,very nice. You should be pleased.
 
Thread owner
Tim Marlow said:
More great work Jack. Brass is a bit of a pig to solder as it transmits heat so readily so soldering those steps must have been fun. Did you use the old trick of wrapping the earlier joints in damp tissue so that only the new joint you were trying to make got hot enough to melt solder?
Click to expand...
Thank you Tim, yeah had a few bits set in to have another part ping out. Ah no, will remember that one for next time. I just had multiple metal clamps a) holding it in place and b) trying to take some heat before conduction all the way down.
John Race said:
Looking really good Jack.
PE :thumb2::thumb2::thumb2: and the copper threaded out like that !
Love the variation on the coal unit,very nice. You should be pleased.
Click to expand...
Thanks very much John, yeah I'm really pleased so far.

I think, I'm ready to prime and paint. Like ai said, there are so many hard to reach places, this is going to be a very tricky paint and attach process.
83D915CE-0D1A-4D3A-812B-0A21E830ED2F.jpeg
 
Hi Jack, This will look the bomb when you get the German Gray on her.....will you paint the running gear the same or will it be black, possibly red? Rick H.
 
If it’s wartime she’ll be dark grey and filth…….mostly filth! Some of the lower filth may have a red tinge to it….but still!
 
Thread owner
Thank you, Andrew, Steve, Rick and Tim. Very kind.
Yes she will be all over grey. I think in reality the 'Chassis' (??? Is that what it is on a train???) should be red, regardless of the boiler/cab colour. Hard to tell from the wartime black and whites available, but most of the wrecks around are red. But I didn't like the look...so all over gray, and as Tim said weathered to oblivion.

I am starting to think I took the build too far before applying the paint. There are some really difficult to reach areas. Definitely won't be displaying it on a mirror!
 
Hi Jack
Soldering is difficult when you have a few joints very close to each other. I have had some success with using a solder with a higher melting point for the first joints and then one with a lower melting point for rest. Tim's suggestion of wet tissue heat sinks helps as well. I use those metal hair clips to hold the tissue around the joint.
That is a very imressive build. Really does you credit. Painted and weathered it will be a real show stopper.
Jim
 
Another approach Jim is to tin the bits to be soldered on, mechanically hold the joints in place with blue tack or similar then reflux the area and heat the joints from underneath until the solder just melts.
 
Thread owner
Primed with Mr Surfacer 1000. First time I have used it and am very impressed:
C7D5477A-CC78-40BE-B787-07F3DF64CAE6.jpeg
Pre-shade with MRP Nato Black:
DB138D34-1C20-496B-9EB7-80FDC6571C3A.jpeg
Then a mamoth session with the MRP Tank Grey.
C7A4C87B-0834-4A8F-B25A-4B5256311086.jpeg
Done as much as I need to complete the build stage. Need to paint the subs, but my arm is knackered after all this! This is the better side...a bit disappointed in myself that I applied the grey a little bit too heavily on the reverse. Might be alright.
Thankfully got two of these.
A08CDFC4-9F63-4F0D-BE13-632E044AE816.jpeg
 
Thread owner
Sorry for the lack of activity on this, a combination of work and the recent heat mean not much bench time at all. Got a bit of time this weekend.

Have completed the running gear construction. A bit of paint to add here and there. Only thing left is the walkway plates along the boiler. I have a photo etch set for these...and although they look much better than the kit parts, they might be a bit beyond me. Also made a start on the base.
7FC688F6-C775-4E8C-95C8-0452E0A8F21F.jpeg
49979AE8-DBE1-4CD1-9A6F-95536B58413A.jpeg
 
Hi Jack
That is looking great. Fine paintjob and the base really sets off this superb model.
Jim
 
Niiiiiiiice!
Good work on the Base as well looks excellent :thumb2:
 
You must log in or register to reply here.

Legal Notice

scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.

Currently on our website
Members online
Threads 36,171
Messages 695,385
Members 2,507
Latest member paul020559
Back
Top