John
Those trees have worked out very well indeed. That really is coming together nicely.
ATB.
Andrew
Those trees have worked out very well indeed. That really is coming together nicely.
ATB.
Andrew
I aint seen nothing
G
G
A development over night, the local authority have been out !
Upper level looking good. Love the sign. PaulE
G
Thanks Paul, done it for a certain StuG lover.:smiling3:
G
Funny the StuG lover hasn't even seen it !
Hope the sign has thick armour
G
Won't need any armour Bob, it's too well protected by a battery of 152mm Artillery.Hope the sign has thick armour
G
Greetings from the bunker here at Race Towers. What a miserable day, been raining nearly all day, so no gardening :crying:.
The good thing however was the outer frame has been assembled. Used double sided tape from 3M. What fun a stressful time trying to remove the top to expose the adhesive, consider it worse than joining plastic tracks !
.
It works and is quick, but not easy.
First photo shows the base section of foam board in place, the masking tape was to help align it, as you get only one chance.
Side door to allow access to battery box.
Then came the supports to lift up the inner box in line with the surround card, see the lines on the inner side of the face.
With them in place the inner box is now the correct height.
The top is weighted down while the glue dries.
All in all a pleasant day, very enjoyable to see it come to plan.
Not long now until I can wire up the new battery box and have the first real look at those lights.
Cleaning up of that main front beam and a couple of side section to hold the box in position left to do.
Thanks for following and comments always welcome.
Dzhon.
The good thing however was the outer frame has been assembled. Used double sided tape from 3M. What
.It works and is quick, but not easy.
First photo shows the base section of foam board in place, the masking tape was to help align it, as you get only one chance.
Side door to allow access to battery box.
Then came the supports to lift up the inner box in line with the surround card, see the lines on the inner side of the face.
With them in place the inner box is now the correct height.
The top is weighted down while the glue dries.
All in all a pleasant day, very enjoyable to see it come to plan.
Not long now until I can wire up the new battery box and have the first real look at those lights.
Cleaning up of that main front beam and a couple of side section to hold the box in position left to do.
Thanks for following and comments always welcome.
Dzhon.
Coming together John. Are you putting anything in the woods or just leaving it as trees.....
G
Thanks Rick , me as well .:smiling2:Nice bit of progress there JR.........looking forward to the lights. :thumb2:
Nothing in the tress Tim, but the flashing lights. They are at the back. Representing the muzzle flashes.
Thanks Nicholas.
G
Steve to be true I nearly didn't bother with this outer case, just couldn't decided if it was too large. Happier now. Glad your now in step.:smiling3:
Thank you Neil, perhaps I could , and say it came from you .:smiling3::thumb2:
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.