Coming on nicely Barry.
ATB.
Andrew
ATB.
Andrew
1/48 Dornier Do17Z-2 ICM
- Thread starter BarryW
- Start date
Hi Barry
Back at the bench so hopefully your back is better. Filling wing roots is always a pain. It's not just getting a nice finish but rescribing lost detail.
Jim
Back at the bench so hopefully your back is better. Filling wing roots is always a pain. It's not just getting a nice finish but rescribing lost detail.
Jim
The airframe has progressed and the stabs are now fitted.
I have painted and weathered the components for the wheel wells.
And made a start on the props
The engines sprayed and dry brushed
I have painted and weathered the components for the wheel wells.
And made a start on the props
The engines sprayed and dry brushed
Just caught up with this build Barry and you're making a great job of it.
Coming on very nicely Barry.
Well done.
Andrew
Well done.
Andrew
Looking very tidy Barry. Nice to see a Blitzkrieg era flying pencil on the go.
Hi Barry
Coming on a treat. Up to your usual high standards.
Jim
Coming on a treat. Up to your usual high standards.
Jim
I have been working on the engine nacelles.
The engineering is a bit over complicated, needlessly so. First you build a ‘box’ to form the wheel well which incorporates cross struts. Below shows three sides installed with one to go. The fit is fine if tight.
Then you cement the nacelles around the box
Again the fit is Ok, if tight.
I cemented the front first and, when dry, will bring the rear in together to cement.
A fair bit of filling and sanding is going to be needed on the joins.
The engineering is a bit over complicated, needlessly so. First you build a ‘box’ to form the wheel well which incorporates cross struts. Below shows three sides installed with one to go. The fit is fine if tight.
Then you cement the nacelles around the box
Again the fit is Ok, if tight.
I cemented the front first and, when dry, will bring the rear in together to cement.
A fair bit of filling and sanding is going to be needed on the joins.
Coming on nicely Barry...but over complicated as for say.
Looks like a solution looking for a problem to me. Nice work though….
The engine build up continuing.
It looks as if a fair bit of filling and sanding will be needed around the engine panels.
It looks as if a fair bit of filling and sanding will be needed around the engine panels.
Panels fitted to the engines. There was some tricky work cutting out a section for the exhaust pipes but apart from that was straight forward enough. There is some filling and sanding though.
That is looking very good Barry.
ATB.
Andrew
ATB.
Andrew
Considering you've (from what i can remember) built ZM kits, i find this comment quite funny lol. They are always over engineered, needlessly so.
But Alan, what you describe as over engineering of Zoukei Mura kits is to provide high levels of detail and great fit while offering you options. This kit is over engineered to no purpose, normal detail, normal fit and no options.
I am ready to spray the first black primer coat. I do expect it to show up a few flaws that will need treatment.
The pit was easy to mask off. I fixed the canopies temporarily with Micro Liquid Tape which, when the painting is done, enables them to be easily removed for the fitting of the guns.
The canopies are a perfect fit
The wheel wells were masked in the normal way using blue paper and tape.
I have sprayed some degreaser which I will leave to dry before painting.
The pit was easy to mask off. I fixed the canopies temporarily with Micro Liquid Tape which, when the painting is done, enables them to be easily removed for the fitting of the guns.
The canopies are a perfect fit
The wheel wells were masked in the normal way using blue paper and tape.
I have sprayed some degreaser which I will leave to dry before painting.
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.