discussion Airfix 1/48 Sepecat Jaguar

[papa 695]

Just seen this one Chris, some cracking work going on. Looking very good indeed.

 

[flyjoe180]

Looks good Chris, love the look you've given 'Steve'. I don't usually 'marble' coat either, I'm more inclined to add lighter or darker colours to larger areas, perhaps more of a pre-shade than black-basing.

 

[langy71]

After reading over the posts, I'm thinking of doing a bit of 'marbling' on the undersides.
However I'm thinking about going with a darker MR Surfacer 'mahogany' to help with the dirty underside effect.. any thoughts guys ?

 

[flyjoe180]

A darker mottle would suit the underside in my opinion Chris

 

[Jim R]

Great work on this Chris. Those 3D printed exhausts look great - worth the extra. Pilot looks nice.

 

[langy71]

Finally had a delivery of the paint..so I thought i'd throw a bit at her,

Granted the pics seem a little dark, ( the bottom pic has been lightened and sharpened up to show the detail) but in normal light the pre shade / marbling worked well.

Gonna let this dry completely for a couple of days then it's full stream ahead with the rest of it..

 

[Nicko]

Just caught up with all of this Chris. Looks like a fantastic kit and you're certainly making a great job of it.

Nick

 

[langy71]

Had some time to make a start on the exhaust shields, I've gotta say I'm loving MRP Paints.. their 'metal' colours are perfect.






And a quick test of the resin cans... not bad at all.






Also managed to sort the Gun ports out, Airfix would have you paint this brick red, however there's loads of pictures of the 'red colour' showing it was a protective coating painted onto the steel gun troughs, so here's my take on it..





Also did a bit more work on the 'bleaching' of the upper surfaces.

 

[langy71]

And a question for anybody who may have worked on these aircraft or has more knowledge about this area,

in the picture below I've arrowed the rear of the lower tail section, now for some reason I keep seeing images of the Jaguar with this area fully 'plated' out in bare metal, and then I've also seen images with it painted...Airfix would have you leave this area unplated / and painted the same as the airframe,

Anybody got any idea which is correct for a Gulf War Jag ?

Is it normal for the whole of the lower tail section to be plated ?, or have Airfix got it correct and it was infact painted the same colour as the rest of the airframe ?.

 

[flyjoe180]

Your paint work and post-shading is excellent Chris. You nailed the gun port colour.

Is it normal for the whole of the lower tail section to be plated ?, or have Airfix got it correct and it was infact painted the same colour as the rest of the airframe ?.

The photo I posted earlier for the exhausts, shows that area was left as bare metal Chris. Not to say they didn't paint over it during application of the desert pink paint job, but I'd say it wouldn't have survived long in the exhaust heat.

 

[langy71]

I'm gonna go with your suggestion buddy, there doesn't seem to be a definitive image to say any different..

 

[langy71]

And another update,

Started off with a 'naked' Jag, applied all the decals..(there wasn't that many.lol) and she had a bath on flory models dark dirt wash.







Also started on the weapons, and washes applied to the undercarriage.



Next up a satin coat and oil stains /weathering of the airframe...

 

[scottie3158]

she looks the nuts mate.

 

[Neil]

That is looking excellent - two parts inspired by you to try and match that level and one part scared that I’ll never match that and it’s time to go find a different hobby

 

[langy71]

That is looking excellent - two parts inspired by you to try and match that level and one part scared that I’ll never match that and it’s time to go find a different hobby

Thanks for the kind words fellas,
Neil, I'm no expert buddy most of this is just trial and error,
nothing I do can be classed as anything different or better than anybody else can do, and what's the worst thing that can happen ? I get it wrong and repaint / correct the errors...(and there has been a couple since I started)

To be totally honest I'm about 95% happy with the colour, and even with that I'm contemplating bleaching down the upper surfaces a tiny bit more.

Also had another delivery yesterday...my next project...

 

[langy71]

Whilst looking for some Remove before flight tags I bought a couple of years ago I found this...






Steve, might get a bit of head surgery...lol

 

[yak face]

Looking gorgeous chris , really making me want to do another one

 

[flyjoe180]

Lovely work Chris

 

[HAWKERHUNTER]

Brilliant work Chris.

 

[colin m]

Great work Chris. Now you've got a splash of paint on, all that detail is standing out nicely.