Good luck this time around Chris. Everything crossed.
boatman's 1/72 HMS Tiger C20 build
- Thread starter boatman
- Start date
HI Ian well brushed eletric motors prices aernt to bad here unless you go brushless motors an they can be nr a 100 pounds ago so its the props what are exspnsive as its a specialist trade makin them an i fully exspect them to be anywhere between £20 to £30 each an then times 4 an its a big bill to me anyway an the same with ESC they can also be exspensive so this R/C SHIPS lark can work out dear but when you think about things in blighty everything is dear with this bloomin VAT ON THE TOP as these lot cant rip us all off fast enough just my thoughts
chrisb
THANKS Jim yes im hopein so but my new boaty mate has given me a kick up the ole exhaurst lol to get this back on track but untill them props come im stuck so this sunday at subermerine day i will be takin MY HMS NORFOLK to try an sink a few lol
I really hope you get everything sorted mate.
HI Scottie yes so do i as ive been tryin to get this ship right so she will sail ok but there are so many varibles that can send you in the wrong direction an ive had so much advise i dont know what to beleive but now my new boaty mate has had a given me good advise which means i wont have to drill out all the prop shafts an A-frames so im pining my hopes on this moment when i get them new props but that can take months as this was a fairly nice model an after 30 odd yrs of building them i dint think id have this trouble but just goes to show how wrong i can be at times
CHEERS Scottie for stoppin
chrisb
HI Guys well here we go again for the 5th time been all afternoon tryin to just fit in tiger one of those monster motors an yes i have done it but been very tricky as it was a very tight fit as had to grind out the mounting with my dremel with a grindstone fitted but if i can fit one in then i can fit the other 3 in so hope yet an still waiting for them props an got to go back to the model shop tomorrow as the chap gave me the wrong size motor fixin bolts AN BOY THE PROBS JUST KEEP ON COMIN Aaaaaaccchhhhhhh an a couple of pics below to show that monster motor against the smaller 540
chrisb
chrisb
Well done Chris. You certainly ain't a quitter that's for sure.
Keep going buddy, we're all rooting for you to succeed. :thumb2:
Keep going buddy, we're all rooting for you to succeed. :thumb2:
thanks Doug but im nr on me last legs if these ideas dont work then ive got only one more option an that them treble 555 motors an cheers for rootin for me its keepin up my mojo
chisb
G
Deep breath Chris , just take your time and work through it . Everyone on here supports you .
HI John yes its deep breaths all right as im running out of options fast an just for a trail im only goin to fit them back two monster motors an then ive got to cut off the motor terminals on the wires an refit new ones as the motor terminals are not universal an all are different sizes so more wirein work an im commitin my motor mounts to these motors as if the motors dont do the job then the motor mountins wont be any good for to fit a different motors in so a lot at stake here an cheers for all you guys support an if it dont work out then at least i can say is i TREID an when i go back to the model shop today ive just got to hope the chap will have the correct size motor mountin bolts as he sold me the wrong ones they are too small MORE PROBLEMS will it never end
CHEERS atb all
chisb
WELL GUYS STILL ON THEM MOTORSan well on tigers motors i managed to get some motor fixin bolts to hold motors in their mountins an im just goin to try just 2 big motors an the 2 smaller johnsons motors with the new bigger 45 mm props when they come as my m8 ordered them for me from prop shop an it was a surprise really so will sail with these an if still not enough power then i'll remove the johnsons motors an fit the other 2 big motors an then see how she goes an pic of them 2 big motors all fitted in WITH them johnsons i'll keep tryin till i get it right or give up will see but it makes me wonder how many more timees i will have to do this Aaaaaaccchhhh
chrisb
I would have tried just with the new props first befor fighting with getting those motors fitted. Whats next a bunch of car starter motors? LOL
Keep at it Chris. You will get it sorted.
HI Ian yes i see your point but untill i can get things right WELL its just try an see but the first 2 big motors are now fitted in an love your suggestion lol
chrisb
AN yes Jim im tryin
chrisb
Chris, have you thought about oars????
It worked for the Romans and Vikings!!! :rolling:
It worked for the Romans and Vikings!!! :rolling:
HAHA Doug yea but their ships in a model dint wheigh in at 88 1bs have a hard job movin that wheight with tiny oars lolChris, have you thought about oars????
It worked for the Romans and Vikings!!! :rolling:
chrisb
I guess garden elves and fairies don't exist then :sad:. That's blown another theory!!! Now didn't Sinbad have an automated rowing device? :rolling: :smiling2:
Seriously though Chris, small steps and you'll get there. Process of elimination and all that.:thumb2:
You’ll have him putting paddle wheels on it next Doug.
I‘m sure you’ll nail it though Chris…..
I‘m sure you’ll nail it though Chris…..
I'LL SAY this for you Doug you got a very vivid imaginaion lol:rolling:
:smiling3::tongue-out3: but yes that what it is tryin different motors an them bigger props but accordin to prop shop what ive now fitted in should do the job withthe bigger propspaddle wheels urgh cant stand them an hope so Tim an if it still dont do the job it wont be for the lack of tryin lol
chrisb
Damn!!!! Wish I’d thought of that!!!! :smiling2:
HI ALL well them props have finely come as they were delivered to my boaty mate on monday an as jen an i got invieted to his an his SWMBO for tea i picked them up an they are made from bronce just like the real ships props an not brass an they look the bussiness so ive now fitted them on the shafts an now just got to make the rudder bigger an on warship day will try her out again for the 3rd time wish me luck all an pics of them props an they are now 45mm size up from 33mm
chrisb
chrisb
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.