Coming on nicely Barry!!
Developing a new modelling room
- Thread starter BarryW
- Start date
I have ordered a partition but I found it is being sent from China and will arrive in the first two weeks of October. Not what I thought would happen but I looked at a lot of these and none were quite right.
Consequently I will have to organise something temporary when I start spraying.
Here is how it looks now. I have not got everything out yet and everything is not in it’s final position but not far off.
View attachment 433940
More tomorrow.
Consequently I will have to organise something temporary when I start spraying.
Here is how it looks now. I have not got everything out yet and everything is not in it’s final position but not far off.
View attachment 433940
More tomorrow.
Attachments
I have made good progress today but still have a fair way to go.
Here is how it looks now:
View attachment 434075
As you can see I have moved the spray area to the right to butt against the build area.
This gives me room to put a desk height shelf in to the left the the spray bench extending from wall to cupboard, nearly 6 feet. The shelves will be 18’’ deep for large scale aircraft. This desk level one will be for modelling books at the bench end and completed models on the rest. A high shelf will go around three sides of the room level with the the top of the door for storing, not displaying, complete models, while I will have another display shelf half way between the desk and top storage shelf. Even allowing for some space for my books I will end up with 10 feet of display shelves and about 32 feet of storage shelves. In my garage I managed with about 20 feet total display and storage space combined, so this is a big improvement. If I pushed it I could probably squeeze about double that but that’s maybe for the future.
A close up of the spray area
View attachment 434077
The build area
View attachment 434076
I still have some sorting to do and I might make some changes. For instance I want to add some ModelZone modules to increase my paint capacity. I may want to attach a unit to the wall for more paint/wash bottles as well. I also need to order a nice comfy chair and, of course, I need the screen to protect the printer from overspray, which is on order from China! Blinds are also awaited!
Here is how it looks now:
View attachment 434075
As you can see I have moved the spray area to the right to butt against the build area.
This gives me room to put a desk height shelf in to the left the the spray bench extending from wall to cupboard, nearly 6 feet. The shelves will be 18’’ deep for large scale aircraft. This desk level one will be for modelling books at the bench end and completed models on the rest. A high shelf will go around three sides of the room level with the the top of the door for storing, not displaying, complete models, while I will have another display shelf half way between the desk and top storage shelf. Even allowing for some space for my books I will end up with 10 feet of display shelves and about 32 feet of storage shelves. In my garage I managed with about 20 feet total display and storage space combined, so this is a big improvement. If I pushed it I could probably squeeze about double that but that’s maybe for the future.
A close up of the spray area
View attachment 434077
The build area
View attachment 434076
I still have some sorting to do and I might make some changes. For instance I want to add some ModelZone modules to increase my paint capacity. I may want to attach a unit to the wall for more paint/wash bottles as well. I also need to order a nice comfy chair and, of course, I need the screen to protect the printer from overspray, which is on order from China! Blinds are also awaited!
Attachments
That's looking great Barry. It all seems to have come together pretty quickly.....
Looks all very nice Barry, very comfy setup! :thumb2:
Really coming together now. You must be itching to get to the stage where you can sit down, put on some music, open a box and cut some plastic :thumb2:
Jim
Jim
Coming on nicely Barry.
I have, on order, a nice comfy chair, some Hobbyzone modules and I have asked a carpenter for a quote to do the shelves. The blinds are on order and should be a couple of weeks.
As far as the rest of the flat is concerned I am still awaiting my nice comfy recliner and cannot do a great deal in the lounge until that arrives. This week I will take delivery of bedside tables, lights and a chest of drawers so, apart from the blinds and some pictures that room will be done this week. My bathroom won’t get done until October and they cannot install my new kitchen until January!
As far as the rest of the flat is concerned I am still awaiting my nice comfy recliner and cannot do a great deal in the lounge until that arrives. This week I will take delivery of bedside tables, lights and a chest of drawers so, apart from the blinds and some pictures that room will be done this week. My bathroom won’t get done until October and they cannot install my new kitchen until January!
HI Barry in my opinion dont worry about things beyond your controll but to me it looks as though you are getting there thats all that matters as they say rome wer'nt built in a day
chris
chris
This morning, while waiting for bedroom furniture to be delivered I have sorted out the cupboard with my spares supplies and stash.
I managed to fit 18 kits in my stash right in the top. Now these are not small boxes and the cupboard goes up high inside so you cannot see them all.
View attachment 434281
Everything else has been arranged on shelves and on the floor of the cupboard.
View attachment 434280
View attachment 434282
Of course everything I use regularly are on the bench on the Hobbyzone modules.
I have my next build on the desk though I am days away from making a start. The whole room looks a lot tidier. Have four large plastic boxes going spare!
View attachment 434283
I managed to fit 18 kits in my stash right in the top. Now these are not small boxes and the cupboard goes up high inside so you cannot see them all.
View attachment 434281
Everything else has been arranged on shelves and on the floor of the cupboard.
View attachment 434280
View attachment 434282
Of course everything I use regularly are on the bench on the Hobbyzone modules.
I have my next build on the desk though I am days away from making a start. The whole room looks a lot tidier. Have four large plastic boxes going spare!
View attachment 434283
Attachments
Much window envy.
I now have a nice new comfy chair…
View attachment 434368
Left to do:
1/ Blinds, these are on order and hopefully will be fitted within a couple of weeks .
2/ New Hobbyzone units. I am changing the lay-out and these should arrive this week.
3/ Shelves. I am chasing someone to give me a quote.
I expect to start my next build once the Hobbyzone units are in place. Obviously I don’t need to wait for the blinds and shelves to start. My time currently is spent with flat packs and trips to the dump but hopefully by next week the worse of that will be over and the Hobbyzone units will be in place.
View attachment 434368
Left to do:
1/ Blinds, these are on order and hopefully will be fitted within a couple of weeks .
2/ New Hobbyzone units. I am changing the lay-out and these should arrive this week.
3/ Shelves. I am chasing someone to give me a quote.
I expect to start my next build once the Hobbyzone units are in place. Obviously I don’t need to wait for the blinds and shelves to start. My time currently is spent with flat packs and trips to the dump but hopefully by next week the worse of that will be over and the Hobbyzone units will be in place.
Attachments
Hi Barry
Really looking good. A wonderful place for you to pursue your hobby. Mind you waiting for the kitchen and bathroom could mean that you'll be one very skinny and rather smelly modeller :smiling: :rolling::smiling:
Really looking good. A wonderful place for you to pursue your hobby. Mind you waiting for the kitchen and bathroom could mean that you'll be one very skinny and rather smelly modeller :smiling: :rolling::smiling:
Well, perhaps I should not bother to turn on the spray booth and rely on MRP fumes to cover the smell. ……..
Looking very sharp Barry.
You might want to re-home the AB holder. It's set up for a dive if you roll your chair back and knock it one. (ask me how I know
)
You might want to re-home the AB holder. It's set up for a dive if you roll your chair back and knock it one. (ask me how I know
)
A good point Ian, thanks. I have angled it away from the chair and there is more room than it looks in the photo. I have sat and moved around in the chair and it seems as if it might be OK
The photo is with the chair right back and it is more likely to catch on the corner of the spray bench than the airbrush. We will see!!!
View attachment 434453
The photo is with the chair right back and it is more likely to catch on the corner of the spray bench than the airbrush. We will see!!!
View attachment 434453
Attachments
One possible change. When I get my 18’’ shelf at desk height I may reposition the printer into the shelf and off the desk. That means my modelling books will go on the desk between the printer and spray booth. This will give me a little more desk room when I spray to place sprayed parts, though there will be a Perspex divider in the way.
I also have a small Bluetooth speaker to go in front of the books.
View attachment 434454
Inter sting goes the photo gives the impression of much less space than there is. That gap between spray bench and wall is about 19’’.
I also have a small Bluetooth speaker to go in front of the books.
View attachment 434454
Inter sting goes the photo gives the impression of much less space than there is. That gap between spray bench and wall is about 19’’.
Attachments
My Hobbyzone modules have arrived and I put them together. I now have room for some Italian and Japanese MRP colours that will be needed soon.
All that are missing are the blinds, another week or so and the shelving.
Back to the bench next week!
View attachment 434468
All that are missing are the blinds, another week or so and the shelving.
Back to the bench next week!
View attachment 434468
Attachments
A lovely set up Barry.... Looks really good.
ATB
Andrew
ATB
Andrew
THIS one will be a contender for the TBC lol
chris
chris
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.