As it turned out Andy the gaps didn't materialise. All in all its a pretty good fit.
Steve's 1/32 Revell Supermarine Spitfire Mk.IXc
- Thread starter HAWKERHUNTER
- Start date
Ive had it before when I have got to the end of a build, all pained and nicely presented, when a hairline crack appears down the seam. Whenever possible I try and use some form of reinforcement. Probably over engineered Jim but it avoids disappointment particularly on a larger model.
Did some work on the exhaust pipes. The pipes come in two halves that are joined to make a single unit. Had to take the locating pins off to get something of a reasonable fit but with some tidying up they should make a good looking exhaust. At least you get an exhaust with hollowed out pipes.
Above are the two halves to be joined.
Below are the exhaust after joining. I might try and widen the holes to bring them more into scale.
Next up some masking and painting. I used a combination of templates and blu tac.
When painted I added the yellow leading edge stripes
I wanted the model to have tired looking paintwork hence the pre shading effort. In the past I have always over cooked the top coat so that any pre shading was obliterated. So this time I really tried not to be heavy handed with the airbrush. I think it came out OK although the darker green on the camo which went on over the grey has hidden a lot of the pre shading. I think next time I would apply the first grey coat of camo, mask off for the green and then re do the pre shading just on the area that's getting the darker green. On the whole though I had no dramas with the paint and this is where I am at now.
Above is the rear stripe on the fuzz. Below the full model. Note that there is only a subtle change in shade from the belly grey to the upper grey.
Thanks for checking in.
Above are the two halves to be joined.
Below are the exhaust after joining. I might try and widen the holes to bring them more into scale.
Next up some masking and painting. I used a combination of templates and blu tac.
When painted I added the yellow leading edge stripes
I wanted the model to have tired looking paintwork hence the pre shading effort. In the past I have always over cooked the top coat so that any pre shading was obliterated. So this time I really tried not to be heavy handed with the airbrush. I think it came out OK although the darker green on the camo which went on over the grey has hidden a lot of the pre shading. I think next time I would apply the first grey coat of camo, mask off for the green and then re do the pre shading just on the area that's getting the darker green. On the whole though I had no dramas with the paint and this is where I am at now.
Above is the rear stripe on the fuzz. Below the full model. Note that there is only a subtle change in shade from the belly grey to the upper grey.
Thanks for checking in.
Last edited:
That's coming on very nicely and glad to hear that the gaps disappeared!!
Looking good mate....
Paintwork looks great!
Thanks Andy.
Cheers Peter.
Thanks Andy. I have always admired your amazing paint work so that means alot.
Nice progress Steve! 
Thanks SteveNice progress Steve!
Legal Notice
scalemodelling.co.uk is a privately operated online discussion forum. All content posted by members reflects their own views and opinions and does not necessarily represent those of the forum owners or administrators. While reasonable efforts are made to moderate content, no responsibility is accepted for user-generated material. By using this site, you agree to comply with UK law and the forum rules.